AutoDefects
English

Suzuki SX4 / S-Cross 2016: reliability

39% fewer mechanical failures than the class

3,399 MOT tests of Suzuki SX4 / S-Cross cars first registered in 2016: 8.1% failed for a mechanical defect; the class median at the same age and mileage is 13.2%.

Mechanical failure rate
8.1%
Class median, same age and mileage
13.2%
Failed MOT (any reason)
18.8%
MOT tests
3,399
Recalls
3

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km4212.9%5.4%
50-100k km1,6626.5%11.7%
100-150k km1,03610.2%15.8%
150k+ km28017.5%24.8%

What fails on this year

SystemMechanical fail
Suspension and wheels1.9%
Brakes4.6%
Engine, exhaust and emissions0.8%
Steering0.5%
Body, chassis and corrosion0.8%
Seat belts and airbags0.4%
Lights and electrics (wear)5.7%
Tyres (wear)6.3%
Wipers and windscreen (wear)3.4%
Other and plates (wear)0.1%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2015–2022

    Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed…

    Full text

    Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed hard, increasing the risk of an accident.

    A12/01781/22 ↗
  • EU Safety Gate2015, 2016

    null The ambient temperature sensor may malfunction. If this occurs, the engine controller will not detect sensor failure and consequently the MIL (Malfunction Indicator Light) will not illuminate. These systems monitor…

    Full text

    null The ambient temperature sensor may malfunction. If this occurs, the engine controller will not detect sensor failure and consequently the MIL (Malfunction Indicator Light) will not illuminate. These systems monitor the vehicle’s exhaust and pollution control devices to ensure that they are operating properly.

    A12/0218/17 ↗
  • EU Safety GateSerious2013–2016

    null The seams of the front, seat-back covers may have been sewn incorrectly in the area of the side airbag. As a consequence, the seams are too close together and sewn too tightly so that, in the event of an accident,…

    Full text

    null The seams of the front, seat-back covers may have been sewn incorrectly in the area of the side airbag. As a consequence, the seams are too close together and sewn too tightly so that, in the event of an accident, it is possible that the side airbag will not be deployed correctly.

    A12/0724/16 ↗