City cars
Renault Twingo reliability
In 24,965 UK MOT tests, 28.4% of Renault Twingo cars failed for a mechanical or structural defect. The median city car of the same age and mileage: 21.2%.
- Best years
- —
- Years with most failures
- 2015, 2016, 2018
- Weak spot at high mileage
- Suspension and wheels, Steering, Seat belts and airbags
- Official recalls
- 9 recalls, 1 serious
- Mechanical failure rate
- 28.4%
- Class median, same age and mileage
- 21.2%
- MOT tests
- 24,965
- US owner complaints
- 0
MOT results by test year
The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.
| MOT year | Tests | Mechanical fail | Class median | Any fail |
|---|---|---|---|---|
| 2024 | 24,965 | 28.4% | 21.2% | 38.2% |
| 2023 | 26,159 | 25.7% | 19.8% | 36.1% |
Failure rate by year of first registration
Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.
| Year | Tests | Mechanical fail | Class median | Any fail | Recalls |
|---|---|---|---|---|---|
| 2019 | 234 | 3.4% | 3.8% | 11.5% | 1 |
| 2018 | 793 | 9.3% | 5.5% | 18.2% | 0 |
| 2017 | 1,409 | 11.2% | 7.7% | 19.2% | 1 |
| 2016 | 3,000 | 19.8% | 12.1% | 28.2% | 1 |
| 2015 | 5,055 | 23.2% | 12.9% | 32.5% | 3 |
| 2014 | 927 | 25.8% | 16.6% | 35.0% | 4 |
| 2013 | 961 | 32.6% | 20.5% | 42.1% | 0 |
| 2012 | 1,254 | 34.5% | 21.2% | 43.1% | 0 |
| 2011 | 2,473 | 35.0% | 27.5% | 47.6% | 0 |
| 2010 | 4,063 | 35.7% | 29.1% | 46.1% | 0 |
| 2009 | 1,585 | 33.3% | 31.5% | 45.2% | 0 |
| 2008 | 2,664 | 39.6% | 36.3% | 49.1% | 0 |
| 2007 | 431 | 38.5% | 34.1% | 47.6% | 0 |
What fails, by mileage
Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.
(…) = Class median, same age and mileage
Pre-purchase checklist for the mechanic
Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.
- Suspension and wheels: check arms, bushes, ball joints, springs and shock absorbers for play, cracks and leaks; look for uneven tyre wear.
- Steering: check for play in the rack, track rod ends and column, power-steering leaks and noise on full lock.
- Seat belts and airbags: check every belt retracts and latches, and that the airbag/SRS light goes out after start.
- Recalls: 1 serious recall name this model — ask for proof the work was done
- A12/0498/15 · 2014 · null The buckle latch of the front and rear seat belts has insufficient strength and could fail in the event of a frontal collision.
Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The outer skin of the bonnet may not be properly connected to its structure.As a result, it could become detached while driving, increasing the risk of an accident.
A12/01613/21 ↗null The durability of the front left steering knuckle may be insufficient. The knuckle could consequently deteriorate affecting the steering of the vehicle.
A12/1725/17 ↗null Due to possible breaking of the welds, there is a risk of the outer covering of the bonnet detaching while driving.
A12/0423/17 ↗null The covering of the spoiler might come loose and pieces of the tailgate glass may detach while driving.
A12/0425/17 ↗null The fixing device for the rear bench seat may break in the event of a frontal collision, with a potential risk of any luggage in the boot entering the front of the vehicle.
A12/0818/16 ↗null The engine can be started through the activation of the starter with the ignition key when the vehicle is not placed in park or neutral. This could lead to the vehicle moving unexpectedly which could cause an…
A12/1401/15 ↗Full text
null The engine can be started through the activation of the starter with the ignition key when the vehicle is not placed in park or neutral. This could lead to the vehicle moving unexpectedly which could cause an accident.
Show 3 more recalls
null The welds of the bracket of the anti-roll bar rod on the front shock absorber could rupture which would lead to degradation of the handling of the vehicle during cornering.
A12/0848/15 ↗null The buckle latch of the front and rear seat belts has insufficient strength and could fail in the event of a frontal collision.
A12/0498/15 ↗null There is a risk of inadvertent activation of the Electronic Stability Program (ESP) while driving. The vehicle could accelerate inadvertently or fail to decelerate.
A12/0499/15 ↗