Peugeot 508 2020: reliability
1,649 MOT tests of Peugeot 508 cars first registered in 2020: 7.6% failed for a mechanical defect; the class median at the same age and mileage is 5.4%.
- Mechanical failure rate
- 7.6%
- Class median, same age and mileage
- 5.4%
- Failed MOT (any reason)
- 20.2%
- MOT tests
- 1,649
- Recalls
- 13
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 418 | 4.3% | 2.4% |
| 50-100k km | 918 | 9.2% | 5.9% |
| 100-150k km | 244 | 8.2% | 7.7% |
| 150k+ km | 69 | 4.4% | 10.3% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The vehicle may have a faulty high-voltage battery, which could cause overheating and cause the battery or vehicle to catch fire.
SR/03304/25 ↗Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Full text
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…
SR/00434/25 ↗Full text
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This…
A12/01705/24 ↗Full text
The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This increases the risk of fire in the vehicle.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗The traction battery can overheat due to faulty monitoring software and catch fire.
A12/01741/23 ↗
Show 7 more recalls
The traction battery may overheat and cause a fire.
A12/01619/23 ↗The traction battery can overheat due to faulty monitoring software and catch fire.
A12/01336/23 ↗The electrical supply to the water heater unit can shut off too soon when the vehicle is stopped. Fuel can therefore remain in the heater, producing smoke and fuel leakage. Moreover, the information about atmospheric…
A12/00877/22 ↗Full text
The electrical supply to the water heater unit can shut off too soon when the vehicle is stopped. Fuel can therefore remain in the heater, producing smoke and fuel leakage. Moreover, the information about atmospheric pressure sent by the BSI to the water heating unit is incorrect, so the unit is unable to operate. The unburnt fuel may remain inside the unit may produce smoke when next activated and fuel may potentially leak, increasing the risk of fire.
Due to cabling and software upgrade issues, fuel may leak. Leaking fuel increases the risk of fire
A12/01845/21 ↗The affected vehicles may have a crack in the rear steering knuckles. This could lead to a loss of control over the vehicle or to impaired driving stability, increasing the risk of an accident.
A12/01791/20 ↗The rear axle connection may be defective.This may affect the driving stability, increasing the risk of an accident.
A12/00744/20 ↗Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.
A12/1594/19 ↗