Peugeot 508 2018: reliability
391 MOT tests of Peugeot 508 cars first registered in 2018: 5.6% failed for a mechanical defect; the class median at the same age and mileage is 6.6%.
- Mechanical failure rate
- 5.6%
- Class median, same age and mileage
- 6.6%
- Failed MOT (any reason)
- 13.3%
- MOT tests
- 391
- Recalls
- 8
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 74 | 4.1% | 3.0% |
| 50-100k km | 199 | 5.5% | 6.3% |
| 100-150k km | 73 | 2.7% | 7.7% |
| 150k+ km | 45 | 13.3% | 12.1% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Full text
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…
SR/00434/25 ↗Full text
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗The electrical supply to the water heater unit can shut off too soon when the vehicle is stopped. Fuel can therefore remain in the heater, producing smoke and fuel leakage. Moreover, the information about atmospheric…
A12/00877/22 ↗Full text
The electrical supply to the water heater unit can shut off too soon when the vehicle is stopped. Fuel can therefore remain in the heater, producing smoke and fuel leakage. Moreover, the information about atmospheric pressure sent by the BSI to the water heating unit is incorrect, so the unit is unable to operate. The unburnt fuel may remain inside the unit may produce smoke when next activated and fuel may potentially leak, increasing the risk of fire.
Due to cabling and software upgrade issues, fuel may leak. Leaking fuel increases the risk of fire
A12/01845/21 ↗The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01184/21 ↗Full text
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Show 2 more recalls
The brake hoses on the rear axle can be damaged by coming into contact with the wheel rims. This can cause brake fluid to leak out, increasing the risk of an accident.
A12/01318/20 ↗Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.
A12/1594/19 ↗