AutoDefects
English

Nissan Note 2006: reliability

12% fewer mechanical failures than the class

8,580 MOT tests of Nissan Note cars first registered in 2006: 32.1% failed for a mechanical defect; the class median at the same age and mileage is 36.4%.

Mechanical failure rate
32.1%
Class median, same age and mileage
36.4%
Failed MOT (any reason)
50.1%
MOT tests
8,580
Recalls
4

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km829.8%11.4%
50-100k km95621.3%24.5%
100-150k km2,48027.8%34.2%
150k+ km5,06236.6%40.2%

What fails on this year

SystemMechanical fail
Suspension and wheels23.4%
Brakes9.6%
Engine, exhaust and emissions4.7%
Steering0.8%
Body, chassis and corrosion5.9%
Seat belts and airbags2.0%
Lights and electrics (wear)33.8%
Tyres (wear)7.9%
Wipers and windscreen (wear)8.4%
Other and plates (wear)0.7%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2005–2014

    The gas generator on the passenger side airbags may be defective. Metal fragments can be released when the airbag is activated, causing injuries to the occupants.

    A12/1075/19 ↗
  • EU Safety GateSerious2005–2014

    null In the event of deployment of the passenger airbag, the inflator could rupture causing metal fragments to be produced which could cause injury to the occupants of the vehicle.

    A12/1033/17 ↗
  • EU Safety GateSerious2005–2011

    null In the event of deployment of the driver’s airbag, the internal pressure of the inflator may increase abnormally and, in extreme cases, cause the driver’s airbag inflator casing to rupture.

    A12/1759/15 ↗
  • EU Safety GateSerious2001–2008

    null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this…

    Full text

    null There is a possibility that the lower pinion needle bearing may have been omitted from the steering system during manufacture. If this is the case, the upper bearing would be overloaded and, if left in this condition, the pinion may disengage causing loss of steering control.

    A12/0872/15 ↗