AutoDefects
English

Premium compact

Mercedes-Benz B-Class reliability

In 72,426 UK MOT tests, 17.0% of Mercedes-Benz B-Class cars failed for a mechanical or structural defect. The median premium compact of the same age and mileage: 12.6%.

46of 100Below average35% more mechanical failures than the class
Best years
2018, 2020, 2021
Years with most failures
2008, 2010, 2011
Weak spot at high mileage
Suspension and wheels, Body, chassis and corrosion, Brakes
Official recalls
28 recalls, 15 serious
Mechanical failure rate
17.0%
Class median, same age and mileage
12.6%
First MOT (3 years old), 2021
1.5% (1.9%)
MOT tests
72,426
US owner complaints
0

MOT results by test year

The whole fleet of this model at each year’s MOT, against its class at the same age and mileage. Shows whether the model keeps its standing as it ages.

MOT yearTestsMechanical failClass medianAny fail
202472,42617.0%12.6%27.3%
202373,04016.3%11.7%26.7%

Failure rate by year of first registration

Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.

This modelClass median
0%13%26%2005: 32.6%2005 Class median: 27.4%052006: 34.2%2006 Class median: 25.9%062007: 33.0%2007 Class median: 24.7%072008: 35.4%2008 Class median: 24.6%082009: 31.8%2009 Class median: 23.5%092010: 30.0%2010 Class median: 19.2%102011: 29.2%2011 Class median: 16.0%112012: 20.3%2012 Class median: 16.3%122013: 17.4%2013 Class median: 12.7%132014: 14.8%2014 Class median: 11.6%142015: 10.8%2015 Class median: 9.0%152016: 8.6%2016 Class median: 7.3%162017: 6.8%2017 Class median: 5.9%172018: 4.0%2018 Class median: 4.4%182019: 3.6%2019 Class median: 3.5%192020: 2.3%2020 Class median: 2.4%202021: 1.5%2021 Class median: 1.9%212022: 2.5%2022 Class median: 1.2%22
YearTestsMechanical failClass medianAny failRecalls
20221202.5%1.2%7.5%2
20211,8851.5%1.9%9.1%2
20202,9802.3%2.4%8.8%5
20194,2973.6%3.5%10.7%7
20183,9864.0%4.4%14.0%7
20175,7106.8%5.9%17.2%8
20165,3768.6%7.3%19.5%6
20155,66810.8%9.0%21.5%6
20148,27314.8%11.6%25.9%6
20137,13217.4%12.7%28.5%4
20125,81520.3%16.3%29.6%3
20113,59329.2%16.0%41.0%1
20104,59630.0%19.2%41.9%0
20094,33631.8%23.5%43.5%0
20083,51035.4%24.6%45.6%0
20072,69433.0%24.7%44.6%0
20062,04234.2%25.9%44.4%0
200540832.6%27.4%43.1%0

Most common MOT failures

The defects testers recorded most often on this model, in DVSA’s own wording (English), per 1,000 MOT tests.

Defect (DVSA wording)SystemPer 1,000 tests
Coil spring: fractured or brokenSuspension and wheels41.2
Linkage ball joint dust cover: ball joint dust cover no longer prevents the ingress of dirtSuspension and wheels33.2
Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirtBody, chassis and corrosion28.7
Condition: has a cut in excess of the requirements deep enough to reach the ply or cordsTyres (wear)25.6
Registration plate lamp(s): inoperative in the case of a single lamp or all lampsLights and electrics (wear)25
ball joint excessively wornSuspension and wheels24.7
Rigid brake pipes: excessively corrodedBrakes22.9
Brake pads: less than 1.5 mm thickBrakes22.5
tread depth below requirements of 1.6mmTyres (wear)22
Condition: has ply or cords exposedTyres (wear)20.7
Washers: provides insufficient washer liquidWipers and windscreen (wear)19.4
Headlamp aim: too lowLights and electrics (wear)18.1
Stop lamp: not workingLights and electrics (wear)16.8
Wipers: does not clear the windscreen effectivelyWipers and windscreen (wear)16
Headlamp: not working on dipped beamLights and electrics (wear)14.9

What fails, by mileage

Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.

System0-50k km50-100k km100-150k km150k+ km
Mechanical fail2.8% (2.7)10.0% (7.4)20.8% (15.0)31.4% (23.5)
Tests12,07322,50920,65017,194
Suspension and wheels1.0% (0.6)5.2% (2.3)11.7% (5.4)17.7% (9.9)
Brakes0.8% (0.9)3.0% (2.3)7.2% (4.6)12.9% (7.7)
Engine, exhaust and emissions0.5% (0.4)1.6% (0.9)3.4% (2.2)6.3% (4.3)
Steering0.0% (0.0)0.1% (0.1)0.4% (0.3)1.1% (0.7)
Body, chassis and corrosion0.2% (0.1)0.9% (0.4)3.3% (0.9)7.6% (2.2)
Seat belts and airbags0.5% (0.2)0.8% (0.3)1.5% (0.6)2.8% (1.3)
Lights and electrics (wear)2.2% (1.6)6.3% (3.5)12.3% (6.9)18.1% (12.6)
Tyres (wear)4.3% (5.4)6.4% (6.9)7.8% (7.9)8.4% (8.9)
Wipers and windscreen (wear)1.1% (1.2)2.6% (2.0)4.6% (2.9)7.3% (4.0)
Other and plates (wear)0.1% (0.2)0.2% (0.3)0.4% (0.4)0.4% (0.5)

(…) = Class median, same age and mileage

Pre-purchase checklist for the mechanic

Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.

  1. Suspension and wheels: check arms, bushes, ball joints, springs and shock absorbers for play, cracks and leaks; look for uneven tyre wear.
  2. Body and chassis: inspect sills, subframes, jacking points and the floor for corrosion and previous repairs.
  3. Brakes: measure discs and pads, check brake pipes and hoses for corrosion, and test the handbrake and ABS warning light.
  4. Recalls: 5 serious recalls name this model — ask for proof the work was done
    • SR/00883/25 · 2024 · A gasket is lacking between the exhaust manifold and the exhaust gas turbocharger. This can lead to hot, unpurified exhaust gas seeping out…
    • A12/00940/24 · 2017–2024 · The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power…
    • A12/00017/22 · 2016–2020 · A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine…
    • A12/00506/22 · 2020 · Improper wiring harness of the left rear side airbag can damage the airbag when weight is placed on the rear seat cushion. As a result,…
    • A12/01523/21 · 2019 · The corrosion protection on the high voltage battery housing cannot be guaranteed to last for the whole lifetime of the vehicle. After the…

    Check a specific car by its VIN on the official sites: NHTSA (US) · DVSA (UK)

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2022–2025

    The wheel bolts were not tightened in accordance with the torque specifications. The bolts and the wheel assembly could detach while the vehicle is in motion, increasing the risk of accidents.

    SR/01626/26 ↗
  • EU Safety Gate2025

    A washer for the front safety belts may not correspond to specifications and could not withstand the loads. In the event of an accident, the restraining effect could be incomplete, increasing the risk of injuries.

    SR/03986/25 ↗
  • EU Safety GateSerious2024

    A gasket is lacking between the exhaust manifold and the exhaust gas turbocharger. This can lead to hot, unpurified exhaust gas seeping out between the turbocharger and the manifold. This can damage the cylinder head…

    Full text

    A gasket is lacking between the exhaust manifold and the exhaust gas turbocharger. This can lead to hot, unpurified exhaust gas seeping out between the turbocharger and the manifold. This can damage the cylinder head cover and cause an oil leak. If the oil come into contact with hot engine parts, the vehicle can catch fire.

    SR/00883/25 ↗
  • EU Safety Gate2024

    The pyrofuse casing may move while the vehicle is in motion, potentially damaging cables. As a result, the pyrofuse could fail during an accident or cause the separator piston to dislodge into the driver’s footwell,…

    Full text

    The pyrofuse casing may move while the vehicle is in motion, potentially damaging cables. As a result, the pyrofuse could fail during an accident or cause the separator piston to dislodge into the driver’s footwell, increasing the risk of injury. Additionally, in plug-in hybrid and electric vehicles, cable damage could lead to high-voltage system failure and loss of power without warning, increasing the risk of an accident.

    A12/02969/24 ↗
  • EU Safety GateSerious2017–2024

    The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of…

    Full text

    The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of an accident.

    A12/00940/24 ↗
  • EU Safety GateSerious2016–2020

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…

    Full text

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.

    A12/00017/22 ↗
Show 22 more recalls
  • EU Safety GateSerious2020

    Improper wiring harness of the left rear side airbag can damage the airbag when weight is placed on the rear seat cushion. As a result, this airbag may not deploy, increasing the risk of injury in the event of an…

    Full text

    Improper wiring harness of the left rear side airbag can damage the airbag when weight is placed on the rear seat cushion. As a result, this airbag may not deploy, increasing the risk of injury in the event of an accident.

    A12/00506/22 ↗
  • EU Safety Gate2019–2021

    Improper torque of the screws on the brake caliper housing can cause the screw connections to become loose. As a result, the braking performance would be reduced and components of the brake caliper may be lost,…

    Full text

    Improper torque of the screws on the brake caliper housing can cause the screw connections to become loose. As a result, the braking performance would be reduced and components of the brake caliper may be lost, increasing the risk of accidents.

    A12/00531/22 ↗
  • EU Safety GateSerious2019

    The corrosion protection on the high voltage battery housing cannot be guaranteed to last for the whole lifetime of the vehicle. After the vehicle has been in use for a longer period of time, the high voltage battery…

    Full text

    The corrosion protection on the high voltage battery housing cannot be guaranteed to last for the whole lifetime of the vehicle. After the vehicle has been in use for a longer period of time, the high voltage battery housing could therefore corrode under certain specific environmental conditions. In this case, the sealing effect of the battery housing could then gradually be compromised, allowing moisture to penetrate the battery. This could lead to insulation failure, resulting in it being impossible to restart the vehicle once the engine has been switched off. Furthermore, this could increase the risk of fire.

    A12/01523/21 ↗
  • EU Safety Gate2016, 2017

    A bore hole in the universal joint on the steering shaft may have incorrect size. As a result, there could be play between the bearing fitted into the bore hole and the universal joint, which could cause the joint to…

    Full text

    A bore hole in the universal joint on the steering shaft may have incorrect size. As a result, there could be play between the bearing fitted into the bore hole and the universal joint, which could cause the joint to become detached over time.This would impair the vehicle’s steerability, increasing the risk of an accident.

    A12/00857/21 ↗
  • EU Safety Gate2018

    The front seats may not be sufficiently stable. As a result, the seat and its occupant could move more than expected in the event of a crash, leading to increased risk of injury.

    A12/00732/21 ↗
  • EU Safety Gate2019

    The air-conditioning system's condensed-water drainage hose may be blocked, which may cause water to enter into the vehicle's interior. Consequently, any electrical components installed there could be corroded and/or…

    Full text

    The air-conditioning system's condensed-water drainage hose may be blocked, which may cause water to enter into the vehicle's interior. Consequently, any electrical components installed there could be corroded and/or subjected to short circuits or leakage currents. As a result, the Supplemental Restraint System (SRS) control unit could stop working, the vehicle may fail to start, the engine emergency run could be activated while the vehicle is in motion, and the functioning of other components (e.g. the fuel pump, automatic/manual emergency call) could be adversely affected. This would increase the risk of injury and accident.

    INFO/00101/21 ↗
  • EU Safety GateSerious2019, 2020

    The oil-supply pipe on the turbocharger may leak. As a result, engine oil could leak onto the under-body paneling and from there onto the road, posing a risk to the following traffic.Moreover, leaking engine oil might…

    Full text

    The oil-supply pipe on the turbocharger may leak. As a result, engine oil could leak onto the under-body paneling and from there onto the road, posing a risk to the following traffic.Moreover, leaking engine oil might come into contact with hot components in the engine compartment, increasing the risk of fire.

    A12/01337/20 ↗
  • EU Safety Gate2018

    The welded joints fixing the frame of the front seats may not comply with the specifications. As a result they could fail in the event of a crash, causing the seat and its occupant to move more than expected, leading to…

    Full text

    The welded joints fixing the frame of the front seats may not comply with the specifications. As a result they could fail in the event of a crash, causing the seat and its occupant to move more than expected, leading to increased risk of injuries.

    A12/01146/20 ↗
  • EU Safety Gate2013

    Refrigerant of type R134a is used in the air conditioning system.As a result, the affected vehicles do not meet the requirements for type approval.

    A12/00488/20 ↗
  • EU Safety GateSerious2014–2017

    The occupant classification system for the front passenger seat may not be calibrated in accordance with the specifications. Consequently, an installed child seat may be identified as a person or a small, light person…

    Full text

    The occupant classification system for the front passenger seat may not be calibrated in accordance with the specifications. Consequently, an installed child seat may be identified as a person or a small, light person as a child seat. As a result, the passenger airbag could be activated despite the presence of a child seat or the passenger airbag could fail to activate despite the presence of a person on the passenger seat, increasing the risk of injuries.

    A12/00346/20 ↗
  • EU Safety GateSerious2019

    The four self-locking nuts used to attach the airbag might not have been correctly tightened. As a result, in the event of an accident in which the airbag was deployed, it could become detached from its base plate,…

    Full text

    The four self-locking nuts used to attach the airbag might not have been correctly tightened. As a result, in the event of an accident in which the airbag was deployed, it could become detached from its base plate, failing to provide its restraining effect and increasing the risk of injuries.

    A12/00069/19 ↗
  • EU Safety Gate2017, 2018

    The fixing screw connecting the base holder of the manual control device may not be correctly fitted. This can impair the control over the vehicle, increasing the risk of an accident.

    A12/1794/19 ↗
  • EU Safety Gate2018

    A bolt in the locking mechanism of the articulated trailer coupling is defective. It could break while a trailer is being towed and consequently the trailer could detach, thus increasing the risk of an accident for…

    Full text

    A bolt in the locking mechanism of the articulated trailer coupling is defective. It could break while a trailer is being towed and consequently the trailer could detach, thus increasing the risk of an accident for following traffic.

    A12/0267/19 ↗
  • EU Safety GateSerious2018

    The calibration of the occupant classification system for the passenger seat may not be adequate. As a consequence, the installation of a child seat may not deactivate the passenger airbag as required. In the event of…

    Full text

    The calibration of the occupant classification system for the passenger seat may not be adequate. As a consequence, the installation of a child seat may not deactivate the passenger airbag as required. In the event of an accident, the passenger airbag could therefore be deployed. This could increase the risk of injury to a child in a rear-facing child seat.

    A12/1621/18 ↗
  • EU Safety GateSerious2011–2017

    null The steering column is not sufficiently earthed. As a result, in the event of an electrostatic discharge, the driver's airbag may be triggered when not required. This could cause an accident.

    A12/1733/17 ↗
  • EU Safety GateSerious2014–2017

    null The starter current limiter may be overloaded and overheat. As a consequence, the surrounding components could ignite, leading to a fire.

    A12/1352/17 ↗
  • EU Safety GateSerious2016, 2017

    null The mixture ratio of the fuel in the inflators of the front-passenger knee, pelvic and side curtain airbags may not be correct. In the event of an accident requiring the deployment of the airbags, this could lead…

    Full text

    null The mixture ratio of the fuel in the inflators of the front-passenger knee, pelvic and side curtain airbags may not be correct. In the event of an accident requiring the deployment of the airbags, this could lead to the airbags not inflating properly.

    A12/0763/17 ↗
  • EU Safety GateSerious2012–2015

    null The back screws on the rear seats could be missing on one side. Passengers would therefore not be protected from unsecured luggage in the event of a frontal collision, because the rear seat could be lifted from…

    Full text

    null The back screws on the rear seats could be missing on one side. Passengers would therefore not be protected from unsecured luggage in the event of a frontal collision, because the rear seat could be lifted from behind. Furthermore, the required seat belt anchorage may not be guaranteed.

    A12/0599/16 ↗
  • EU Safety Gate2015

    null The bolt connections for the wheels on the right-hand side of the vehicle may have been fitted defectively. There is a risk of bolt connections coming loose and leading to the loss of a wheel, which would increase…

    Full text

    null The bolt connections for the wheels on the right-hand side of the vehicle may have been fitted defectively. There is a risk of bolt connections coming loose and leading to the loss of a wheel, which would increase the risk of a potential accident.

    A12/0353/16 ↗
  • EU Safety Gate2012–2014

    null Incorrect software was installed in the Electronic Stability Programme (ESP) control device of the vehicles affected.

    A12/0294/16 ↗
  • EU Safety GateSerious2015

    null Cracks may form in the high-pressure fuel pipes leading to a fuel leak and a vehicle fire.

    A12/0284/16 ↗
  • EU Safety GateSerious2014

    null Owing to the incorrect installation of fuses, various vehicle functions might fail. These include the passenger presence detector for the passenger seat, the status display for the passenger airbag, the instrument…

    Full text

    null Owing to the incorrect installation of fuses, various vehicle functions might fail. These include the passenger presence detector for the passenger seat, the status display for the passenger airbag, the instrument cluster and the windscreen wipers. This could lead to an accident or an increased risk of injury for the passenger in the event of an accident.

    A12/1035/15 ↗