AutoDefects
English

Honda Civic 2015: reliability

53% fewer mechanical failures than the class

14,989 MOT tests of Honda Civic cars first registered in 2015: 7.4% failed for a mechanical defect; the class median at the same age and mileage is 15.8%.

Mechanical failure rate
7.4%
Class median, same age and mileage
15.8%
Failed MOT (any reason)
18.9%
MOT tests
14,989
Recalls
6

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km1,1462.6%6.2%
50-100k km5,1275.0%11.9%
100-150k km5,3968.5%18.0%
150k+ km3,32011.2%21.7%

What fails on this year

SystemMechanical fail
Suspension and wheels1.4%
Brakes4.6%
Engine, exhaust and emissions0.9%
Steering0.6%
Body, chassis and corrosion0.3%
Seat belts and airbags0.4%
Lights and electrics (wear)6.8%
Tyres (wear)6.2%
Wipers and windscreen (wear)3.6%
Other and plates (wear)0.2%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2014–2021

    On wheels without pressed-in hubs made of alloy steel, the tightening torque of the wheel nuts is too low and could cause the nuts to come loose while the vehicle is in motion, resulting in a risk of wheel loss,…

    Full text

    On wheels without pressed-in hubs made of alloy steel, the tightening torque of the wheel nuts is too low and could cause the nuts to come loose while the vehicle is in motion, resulting in a risk of wheel loss, accident and injuries.

    SR/00471/26 ↗
  • EU Safety Gate2015–2018

    During repeated acceleration/deceleration, the emissions control system in the diesel Engine Control Unit (ECU) is unable to prevent sulphur accumulation inside the catalyst due to lack of robustness of the engine…

    Full text

    During repeated acceleration/deceleration, the emissions control system in the diesel Engine Control Unit (ECU) is unable to prevent sulphur accumulation inside the catalyst due to lack of robustness of the engine control software. This reduces the purification performance of nitrogen oxides (NOx). Therefore, it does not satisfy the regulatory requirement for emissions level.

    A12/00115/20 ↗
  • EU Safety GateSerious2010–2015

    A defect in the gas generator of the front-seat passenger airbag leads to uncontrolled inflation and the release of metal fragments when the airbag is activated. This can cause the occupants of the vehicle to be injured.

    A12/0063/19 ↗
  • EU Safety GateSerious2004–2015

    null Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In this event, metal fragments could be propelled into the passenger compartment, potentially causing injury to a vehicle…

    Full text

    null Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In this event, metal fragments could be propelled into the passenger compartment, potentially causing injury to a vehicle occupant.

    A12/0474/16 ↗
  • NHTSA (US)2014, 2015

    Honda (American Honda Motor Co.) is recalling certain model year 2014-2015 Civic vehicles manufactured January 16, 2014, to November 6, 2014 and 2015 Fit vehicles manufactured March 12, 2014, to May 12, 2015. The…

    Full text

    Honda (American Honda Motor Co.) is recalling certain model year 2014-2015 Civic vehicles manufactured January 16, 2014, to November 6, 2014 and 2015 Fit vehicles manufactured March 12, 2014, to May 12, 2015. The software settings that control the transmission operation may result in damage to the transmission drive pulley shaft.

    15V574000 ↗
  • EU Safety GateSerious2000–2029

    null The driver's airbag inflator may produce excessive internal pressure if deployed. The increased pressure may cause the inflator to rupture propelling metal fragments causing injury to the vehicle occupants.

    A12/0725/15 ↗