Honda Civic 2012: reliability
13,129 MOT tests of Honda Civic cars first registered in 2012: 14.1% failed for a mechanical defect; the class median at the same age and mileage is 22.7%.
- Mechanical failure rate
- 14.1%
- Class median, same age and mileage
- 22.7%
- Failed MOT (any reason)
- 29.2%
- MOT tests
- 13,129
- Recalls
- 7
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 251 | 2.0% | 8.9% |
| 50-100k km | 2,370 | 8.1% | 15.4% |
| 100-150k km | 4,609 | 12.4% | 21.4% |
| 150k+ km | 5,899 | 18.3% | 27.2% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The drive shafts installed in the vehicles concerned were coated with a lubricant which accelerates the wearing of the protective layer covering them, making them more susceptible to damage caused by road debris.…
A12/00656/22 ↗Full text
The drive shafts installed in the vehicles concerned were coated with a lubricant which accelerates the wearing of the protective layer covering them, making them more susceptible to damage caused by road debris. Furthermore, grit containing de-icing agents used to maintain the roads could accumulate in damaged parts of the drive shafts, increasing corrosion and the risk of breaking at high torque.Both situations increase the risk of accident/injury for passengers and other road users.
A defect in the gas generator of the front-seat passenger airbag leads to uncontrolled inflation and the release of metal fragments when the airbag is activated. This can cause the occupants of the vehicle to be injured.
A12/0063/19 ↗null Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In this event, metal fragments could be propelled into the passenger compartment, potentially causing injury to a vehicle…
A12/0474/16 ↗Full text
null Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In this event, metal fragments could be propelled into the passenger compartment, potentially causing injury to a vehicle occupant.
null The driver's airbag inflator may produce excessive internal pressure if deployed. The increased pressure may cause the inflator to rupture propelling metal fragments causing injury to the vehicle occupants.
A12/0725/15 ↗These vehicles were assembled with the incorrect steering column assembly.
12V548000 ↗Full text
Honda is recalling certain model year 2012 Civic passenger vehicles, manufactured from October 26, 2012, through October 30, 2012. These vehicles were assembled with the incorrect steering column assembly.
DURING ASSEMBLY, THE PROCESS REQUIRED TO SEAT THE DRIVERS SIDE DRIVESHAFT AND SET THE RETAINING CLIP WAS NOT COMPLETED. AS A RESULT, THE DRIVESHAFT MAY SEPARATE.
12V256000 ↗Full text
HONDA IS RECALLING CERTAIN MODEL YEAR 2012 HONDA CIVIC VEHICLES. DURING ASSEMBLY, THE PROCESS REQUIRED TO SEAT THE DRIVERS SIDE DRIVESHAFT AND SET THE RETAINING CLIP WAS NOT COMPLETED. AS A RESULT, THE DRIVESHAFT MAY SEPARATE.
Show 1 more recalls
THERE IS A POSSIBILITY THAT AN O-RING, WHICH SEALS A CONNECTION IN THE FUEL FEED LINE, IS MISALIGNED. IF THE O-RING IS MISALIGNED, A SMALL FUEL LEAK MAY OCCUR.
11V288000 ↗Full text
HONDA IS RECALLING CERTAIN MODEL YEAR 2012 CIVIC 2-DOOR AND 4-DOOR VEHICLES MANUFACTURED FROM APRIL 21, 2011, THROUGH MAY 2, 2011. THERE IS A POSSIBILITY THAT AN O-RING, WHICH SEALS A CONNECTION IN THE FUEL FEED LINE, IS MISALIGNED. IF THE O-RING IS MISALIGNED, A SMALL FUEL LEAK MAY OCCUR.