AutoDefects
English

BMW 5 Series 2000: reliability

4% more mechanical failures than the class

1,097 MOT tests of BMW 5 Series cars first registered in 2000: 26.8% failed for a mechanical defect; the class median at the same age and mileage is 25.7%.

Mechanical failure rate
26.8%
Class median, same age and mileage
25.7%
Failed MOT (any reason)
35.2%
MOT tests
1,097
Recalls
5

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km520.0%—%
50-100k km5810.3%10.2%
100-150k km15118.5%18.5%
150k+ km88329.3%28.0%

What fails on this year

SystemMechanical fail
Suspension and wheels12.3%
Brakes13.0%
Engine, exhaust and emissions4.0%
Steering4.6%
Body, chassis and corrosion5.8%
Seat belts and airbags4.5%
Lights and electrics (wear)14.1%
Tyres (wear)4.7%
Wipers and windscreen (wear)7.1%
Other and plates (wear)0.6%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2000–2004

    Owing to retrofitting of the steering wheel, certain vehicles may be equipped with a driver airbag that has a gas generator which could burst in the event of airbag activation if it has been exposed to moisture and heat…

    Full text

    Owing to retrofitting of the steering wheel, certain vehicles may be equipped with a driver airbag that has a gas generator which could burst in the event of airbag activation if it has been exposed to moisture and heat cycles over time. This may result in metal parts being discharged, which could lead to injury or death of the vehicle occupants.

    A12/0484/19 ↗
  • EU Safety GateSerious1998–2003

    The chemical substances in the inflators of the TAKATA PSDI4 airbags may deteriorate over time, particularly in warm, humid climates. This could cause the airbag to rupture with too much force in the event of an…

    Full text

    The chemical substances in the inflators of the TAKATA PSDI4 airbags may deteriorate over time, particularly in warm, humid climates. This could cause the airbag to rupture with too much force in the event of an accident, which could lead to serious or even fatal injuries in the worst-case scenario.

    SR/00581/26 ↗
  • EU Safety GateSerious1999–2003

    The gas generator on the driver side airbag could burst in the event of airbag activation if it had been exposed to high air humidity, high temperatures and considerable temperature fluctuations over several years. This…

    Full text

    The gas generator on the driver side airbag could burst in the event of airbag activation if it had been exposed to high air humidity, high temperatures and considerable temperature fluctuations over several years. This could result in metal parts being discharged, increasing the risk of injury of the vehicle occupants. No information

    A12/00017/19 ↗
  • NHTSA (US)Serious2000–2003

    0i, X5 SAV 4.4i, and X5 SAV 4.6is vehicles. This recall affects certain vehicles where the original steering wheel has been replaced with the optional sports steering wheel. The sports steering wheel has a frontal air…

    Full text

    BMW of North America, LLC (BMW) is recalling certain model year 2000-2003 525i Sedan, 530i Sedan, 540i Sedan, 2001-2003 525i Sports Wagon and 540i Sports Wagon vehicles, and 2000-2004 X5 SAV 3.0i, X5 SAV 4.4i, and X5 SAV 4.6is vehicles. This recall affects certain vehicles where the original steering wheel has been replaced with the optional sports steering wheel. The sports steering wheel has a frontal air bag inflator that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

    19V015000 ↗
  • EU Safety GateSerious1999–2003

    null If the driver's airbag is deployed, the inflator might burst if it was subject to high air humidity, high temperatures and substantial temperature fluctuations over a number of years. This may result in the…

    Full text

    null If the driver's airbag is deployed, the inflator might burst if it was subject to high air humidity, high temperatures and substantial temperature fluctuations over a number of years. This may result in the ejection of metal parts, which could cause injury or death to the driver and the passengers.

    A12/0266/17 ↗

Was this page useful?