Надійність Peugeot 3008
За 140 943 британськими техоглядами MOT 18,2% автомобілів Peugeot 3008 не пройшли через механічний або кузовний дефект. Медіана для компактного кросовера того ж віку й пробігу: 14,1%.
- Найкращі роки
- 2022
- Роки з найбільшою кількістю відмов
- 2016, 2017, 2018
- Слабке місце на великому пробігу
- Підвіска й колеса, Кермове керування, Гальма
- Офіційні відкликання
- 52 відкликань, серйозних: 20
- Відмови через механіку
- 18,2%
- Медіана класу, той самий вік і пробіг
- 14,1%
- Перший техогляд (3 роки), 2021
- 3,5% (3,5%)
- техоглядів MOT
- 140 943
- Скарги власників у США
- 0
Результати техоглядів за роками
Уся флотилія цієї моделі на техоглядах кожного року порівняно з класом того ж віку й пробігу. Видно, чи тримає модель позицію з віком.
| Рік техогляду | Техогляди | Механічні відмови | Медіана класу | Усі відмови |
|---|---|---|---|---|
| 2024 | 140 943 | 18,2% | 14,1% | 28,7% |
| 2023 | 133 142 | 17,5% | 13,7% | 28,5% |
Відсоток відмов за роком першої реєстрації
Частка механічних відмов на техогляді 2024 року за роком першої реєстрації авто порівняно з медіаною класу того ж віку й пробігу.
| Рік | Техогляди | Механічні відмови | Медіана класу | Усі відмови | Відкликання |
|---|---|---|---|---|---|
| 2022 | 496 | 1,4% | 2,1% | 7,1% | 10 |
| 2021 | 12 158 | 3,5% | 3,5% | 11,6% | 12 |
| 2020 | 11 739 | 4,4% | 4,1% | 11,8% | 16 |
| 2019 | 19 120 | 7,7% | 6,2% | 15,9% | 19 |
| 2018 | 18 622 | 11,6% | 7,9% | 19,6% | 12 |
| 2017 | 16 498 | 15,5% | 9,9% | 24,1% | 15 |
| 2016 | 6 556 | 22,4% | 12,4% | 33,3% | 16 |
| 2015 | 8 007 | 21,4% | 16,2% | 33,4% | 11 |
| 2014 | 8 033 | 26,7% | 19,2% | 39,0% | 11 |
| 2013 | 10 705 | 30,5% | 25,1% | 47,2% | 11 |
| 2012 | 10 334 | 31,3% | 26,6% | 45,4% | 10 |
| 2011 | 9 881 | 33,8% | 29,1% | 47,1% | 8 |
| 2010 | 8 062 | 37,3% | 30,9% | 52,0% | 8 |
| 2009 | 711 | 42,6% | 33,4% | 56,5% | 8 |
Найчастіші причини відмов на техогляді
Дефекти, які інспектори найчастіше фіксували на цій моделі, дослівно мовою DVSA (англійською), на 1 000 техоглядів.
Що ламається залежно від пробігу
Частка техоглядів, не пройдених через кожну систему. Витратні елементи (лампи, шини, щітки, номери) не враховуються в індексі надійності.
(…) = Медіана класу, той самий вік і пробіг
Чекліст для СТО перед купівлею
Складено із систем, де ця модель ламається частіше за свій клас при пробігу від 100 000 км, і з відкритих відкликань.
- Підвіска й колеса: перевірте важелі, сайлентблоки, кульові опори, пружини й амортизатори на люфти, тріщини й підтікання; подивіться на нерівномірний знос шин.
- Кермо: перевірте люфт рейки, кермових тяг і наконечників, підтікання підсилювача й шум у крайніх положеннях.
- Гальма: заміряйте диски й колодки, перевірте гальмівні трубки та шланги на корозію, ручне гальмо й лампу ABS.
- Відкликання: серйозних відкликань для моделі — 5. Попросіть підтвердження, що роботи виконано
- SR/01379/26 · 2008–2026 · Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic…
- SR/01314/26 · 2025 · Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be…
- SR/02936/25 · 2008–2025 · The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may…
- SR/03373/25 · 2025 · The connection for the auxiliary heating in the 48 V battery harness terminal may not be adequate. This issue could lead to the heating not…
- SR/03304/25 · 2019–2022 · The vehicle may have a faulty high-voltage battery, which could cause overheating and cause the battery or vehicle to catch fire.
Перевірте конкретне авто за VIN на офіційних сайтах: NHTSA (US) · DVSA (UK)
Офіційні відкликання
Відкликання, опубліковані NHTSA (США) та EU Safety Gate, у яких названо цю модель. Чи стосується це конкретного авто, перевіряйте за VIN.
Some vehicles have been registered with class A+ tyres, while the tyres actually fitted are class B. Therefore, the CO₂ emissions declared in the certificate of conformity, which are related to the tyre class, are…
OR/00115/26 ↗Повний текст
Some vehicles have been registered with class A+ tyres, while the tyres actually fitted are class B. Therefore, the CO₂ emissions declared in the certificate of conformity, which are related to the tyre class, are incorrect. The tyre class has an impact on rolling resistance and therefore affects CO₂ emissions. Class B tyres generally have a higher rolling resistance than class A+ tyres.
Interior door handles may deactivate when the key is in engine-running mode, which could prevent occupants from exiting the vehicle, potentially leading to injury in the event of an accident.
SR/01735/26 ↗Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…
SR/01379/26 ↗Повний текст
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.
Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be cooled down sufficiently, potentially causing it to weaken, warp or break. This could…
SR/01314/26 ↗Повний текст
Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be cooled down sufficiently, potentially causing it to weaken, warp or break. This could lead to sudden engine failure, causing power transmission loss. This could also trigger thermal runaway leading to fire and injuries of the passengers.
The wheel nuts are not securely tightened, which could result in the wheel nut coming loose while the vehicle is in motion, or the loss of a wheel. This could result in an accident and injuries.
SR/00476/26 ↗The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02936/25 ↗
Показати ще 46 відкликань
The fixing screws on the front left and right ball joint mount on the front lower suspension arm may break. This could cause the ball joint mount to pivot and the affected wheel to change direction and hit the mudguard,…
SR/04357/25 ↗Повний текст
The fixing screws on the front left and right ball joint mount on the front lower suspension arm may break. This could cause the ball joint mount to pivot and the affected wheel to change direction and hit the mudguard, which may affect the steering capacity of the vehicle and cause an accident.
The connection for the auxiliary heating in the 48 V battery harness terminal may not be adequate. This issue could lead to the heating not functioning properly. In rare instances, there is a possibility of an electric…
SR/03373/25 ↗Повний текст
The connection for the auxiliary heating in the 48 V battery harness terminal may not be adequate. This issue could lead to the heating not functioning properly. In rare instances, there is a possibility of an electric arc and overheating, which might increase the risk of a fire in the vehicle.
The vehicle may have a faulty high-voltage battery, which could cause overheating and cause the battery or vehicle to catch fire.
SR/03304/25 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03153/25 ↗Повний текст
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Повний текст
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The low-pressure fuel line may touch the screw of the ignition coil. This contact may damage the fuel line and eventually lead to a fuel leak, which may cause the vehicle to catch fire.
SR/01778/25 ↗The headrests may not stay in the position they have been set in, due to defective lock slots on the headrest supports. In the event of an accident, they can come loose, which can compromise their protective function,…
SR/00884/25 ↗Повний текст
The headrests may not stay in the position they have been set in, due to defective lock slots on the headrest supports. In the event of an accident, they can come loose, which can compromise their protective function, increasing the risk of injuries.
Due to a weakness in the crimping interface of the quick coupling connector fitted to the high-pressure fuel pump, a leak may occur in the fuel pipe within the engine compartment. This can result in the vehicle catching…
SR/00445/25 ↗The front left or right ball joint mount on the front lower suspension arm may have defective fixing screws, which could break. Two missing screws will cause the ball joint mount to pivot and the affected wheel to…
SR/00050/25 ↗Повний текст
The front left or right ball joint mount on the front lower suspension arm may have defective fixing screws, which could break. Two missing screws will cause the ball joint mount to pivot and the affected wheel to change direction and hit the mudguard, which may affect the steering capacity of the vehicle, increasing the risk of an accident.
The subframe support can corrode, leading to cracks. This can result in the loss of structural integrity and the consequent loss of control of the vehicle.
A12/03137/24 ↗In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02824/24 ↗The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This…
A12/01705/24 ↗Повний текст
The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This increases the risk of fire in the vehicle.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗The traction battery can overheat due to faulty monitoring software and catch fire.
A12/01741/23 ↗The traction battery may overheat and cause a fire.
A12/01619/23 ↗The safety function of the charging cable may fail and not prevent the cable from overheating, creating a risk of fire.
A12/01621/23 ↗The traction battery can overheat due to faulty monitoring software and catch fire.
A12/01336/23 ↗The high voltage battery has a cell voltage mismatch. This could cause a fire.
A12/01350/22 ↗The high voltage battery has a cell voltage mismatch. This could cause fire.
A12/01343/22 ↗Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…
A12/00046/22 ↗Повний текст
Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01184/21 ↗Повний текст
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The welding of the tow bar may be faulty. As a result, the trailer coupling could break, increasing the risk of an accident.
A12/00646/21 ↗Due to an error in the manufacturing process, the seat rail and seat-belt attachment may be defective.This will lead to increased the risk of injury in the event of an accident.
A12/00601/21 ↗The vacuum pump may be damaged due to material abrasion of the cog belt.As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.
A12/01505/20 ↗The trailer hitch may be defective.As a result, the trailer could become detached inadvertently, increasing the risk of an accident.
A12/00412/21 ↗The affected vehicles may have a crack in the rear steering knuckles. This could lead to a loss of control over the vehicle or to impaired driving stability, increasing the risk of an accident.
A12/01791/20 ↗The sub-frame may corrode and fracture due to defective anti-rust treatment.This can lead to loss of control over the vehicle, increasing the risk of an accident.
A12/01193/20 ↗The bolts attaching the trailer hitch can break.Consequently, the trailer will become detached, increasing the risk of an accident.
A12/00921/20 ↗The rear axle connection may be defective.This may affect the driving stability, increasing the risk of an accident.
A12/00744/20 ↗The two bolts attaching the trailer hitch can break.Consequently, the trailer will become detached, increasing the risk of an accident.
A12/00381/20 ↗Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.
A12/1594/19 ↗The lower part of the seatbelt on the backseats may not be attached. This will impair the seatbelt's restraining function, increasing the risk of injury in the event of a collision.
A12/1472/19 ↗The cylinder-housing oil gallery plug may not have been correctly tightened. As a consequence oil might leak which presents a skid hazard for following traffic.
A12/1364/18 ↗Several components of the chassis may not be correctly tightened. This could affect the suspension and the steering.
A12/1109/18 ↗The bolts attaching the tow bar may not be correctly tightened. Parts of the tow bar could detach and fall on the road.
A12/0646/18 ↗Engine overheating may lead to an oil leak. Engine failure while driving could lead to loss of control of the vehicle resulting in a crash.
A12/0399/18 ↗There is contact between a fuel hose and the aerodynamic screen located under the fuel tank. Over time, this could cause a fuel leak. Fuel leakage onto the road could cause another vehicle to lose control.
A12/0043/18 ↗null The starter motor supply terminal may come into contact with an engine component. This could lead to damage to the supply terminal and to a short circuit. As a result, it may be impossible to start the vehicle.
A12/1344/17 ↗null The fixing studs for the curtain airbags are not welded properly. This could cause a curtain airbag malfunction in the event of a lateral impact.
A12/0986/17 ↗null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of…
A12/0996/17 ↗Повний текст
null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of the electric starter cable and the risk of a short-circuit occurring.
null The hinge pin of the doors and of the retaining clip for this axis might have been incorrectly positioned, which could make it difficult to open and close the doors. If the door falls during the opening, it cannot…
A12/0281/17 ↗Повний текст
null The hinge pin of the doors and of the retaining clip for this axis might have been incorrectly positioned, which could make it difficult to open and close the doors. If the door falls during the opening, it cannot be excluded that it could hurt a passer-by or the person opening the door from the outside.
null A possible fault with the seals at the end of the fuel hose intended for the fuel system of the additional compartment heater (available as an accessory) could lead to a fuel leak.
A12/0208/17 ↗null The upper support of the left rear spring of the suspension may crack or deform, which could affect the vehicle's road-handling characteristics and make it difficult for the driver to keep the vehicle under control.
A12/1022/16 ↗null Oil may leak from the turbocharger on to hot engine parts which could lead to a fire breaking out, even after the engine has been switched off.
A12/0437/16 ↗null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air…
A12/1317/15 ↗Повний текст
null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air to enter the fuel system which could lead to stalling of the engine and loss of control of the car.
null The affected vehicles may exhibit friction wear on the driver's seat wiring harness, potentially causing an electrical malfunction or localised overheating and/or causing the driver's airbag to be triggered.
A12/1068/14 ↗