Fiabilité Peugeot 3008
Sur 140 943 contrôles MOT britanniques, 18,2 % des Peugeot 3008 ont été recalées pour un défaut mécanique ou de structure. Médiane d’une SUV compact du même âge et kilométrage : 14,1 %.
- Meilleures années
- 2022
- Années avec le plus de défaillances
- 2016, 2017, 2018
- Point faible à fort kilométrage
- Suspension et roues, Direction, Freins
- Rappels officiels
- 52 rappels, dont 20 graves
- Taux de défaillance mécanique
- 18,2%
- Médiane de la catégorie, même âge et kilométrage
- 14,1%
- Premier contrôle (3 ans), 2021
- 3,5% (3,5%)
- contrôles MOT
- 140 943
- Plaintes aux États-Unis
- 0
Résultats MOT par année de contrôle
L’ensemble des voitures de ce modèle au contrôle de chaque année, face à la catégorie au même âge et kilométrage. Montre si le modèle tient son rang en vieillissant.
| Année du contrôle | Contrôles | Défaillance mécanique | Médiane catégorie | Tout défaut |
|---|---|---|---|---|
| 2024 | 140 943 | 18,2% | 14,1% | 28,7% |
| 2023 | 133 142 | 17,5% | 13,7% | 28,5% |
Taux de défaillance par année de première immatriculation
Taux de défaillance mécanique au contrôle MOT 2024, par année de première immatriculation, comparé à la médiane de la catégorie au même âge et kilométrage.
| Année | Contrôles | Défaillance mécanique | Médiane catégorie | Tout défaut | Rappels |
|---|---|---|---|---|---|
| 2022 | 496 | 1,4% | 2,1% | 7,1% | 10 |
| 2021 | 12 158 | 3,5% | 3,5% | 11,6% | 12 |
| 2020 | 11 739 | 4,4% | 4,1% | 11,8% | 16 |
| 2019 | 19 120 | 7,7% | 6,2% | 15,9% | 19 |
| 2018 | 18 622 | 11,6% | 7,9% | 19,6% | 12 |
| 2017 | 16 498 | 15,5% | 9,9% | 24,1% | 15 |
| 2016 | 6 556 | 22,4% | 12,4% | 33,3% | 16 |
| 2015 | 8 007 | 21,4% | 16,2% | 33,4% | 11 |
| 2014 | 8 033 | 26,7% | 19,2% | 39,0% | 11 |
| 2013 | 10 705 | 30,5% | 25,1% | 47,2% | 11 |
| 2012 | 10 334 | 31,3% | 26,6% | 45,4% | 10 |
| 2011 | 9 881 | 33,8% | 29,1% | 47,1% | 8 |
| 2010 | 8 062 | 37,3% | 30,9% | 52,0% | 8 |
| 2009 | 711 | 42,6% | 33,4% | 56,5% | 8 |
Défaillances les plus fréquentes au contrôle
Les défauts le plus souvent relevés sur ce modèle, dans la formulation d’origine de la DVSA (en anglais), pour 1 000 contrôles.
Ce qui lâche selon le kilométrage
Part des contrôles échoués sur chaque organe. Les pièces d’usure (ampoules, pneus, essuie-glaces, plaques) n’entrent pas dans l’indice de fiabilité.
(…) = Médiane de la catégorie, même âge et kilométrage
Liste de contrôle pour le garagiste avant l’achat
Établie à partir des organes où ce modèle échoue plus que sa catégorie à partir de 100 000 km, et des rappels ouverts.
- Suspension et roues : vérifier triangles, silentblocs, rotules, ressorts et amortisseurs (jeu, fissures, fuites) ; repérer une usure irrégulière des pneus.
- Direction : jeu de la crémaillère, des biellettes et rotules, fuites d’assistance et bruits en braquage complet.
- Freins : mesurer disques et plaquettes, contrôler la corrosion des conduites et flexibles, le frein à main et le voyant ABS.
- Rappels : 5 rappel(s) grave(s) concernent ce modèle — demandez la preuve des travaux
- SR/01379/26 · 2008–2026 · Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic…
- SR/01314/26 · 2025 · Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be…
- SR/02936/25 · 2008–2025 · The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may…
- SR/03373/25 · 2025 · The connection for the auxiliary heating in the 48 V battery harness terminal may not be adequate. This issue could lead to the heating not…
- SR/03304/25 · 2019–2022 · The vehicle may have a faulty high-voltage battery, which could cause overheating and cause the battery or vehicle to catch fire.
Vérifiez une voiture précise par son VIN sur les sites officiels : NHTSA (US) · DVSA (UK)
Rappels officiels
Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.
Some vehicles have been registered with class A+ tyres, while the tyres actually fitted are class B. Therefore, the CO₂ emissions declared in the certificate of conformity, which are related to the tyre class, are…
OR/00115/26 ↗Texte complet
Some vehicles have been registered with class A+ tyres, while the tyres actually fitted are class B. Therefore, the CO₂ emissions declared in the certificate of conformity, which are related to the tyre class, are incorrect. The tyre class has an impact on rolling resistance and therefore affects CO₂ emissions. Class B tyres generally have a higher rolling resistance than class A+ tyres.
Interior door handles may deactivate when the key is in engine-running mode, which could prevent occupants from exiting the vehicle, potentially leading to injury in the event of an accident.
SR/01735/26 ↗Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…
SR/01379/26 ↗Texte complet
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.
Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be cooled down sufficiently, potentially causing it to weaken, warp or break. This could…
SR/01314/26 ↗Texte complet
Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be cooled down sufficiently, potentially causing it to weaken, warp or break. This could lead to sudden engine failure, causing power transmission loss. This could also trigger thermal runaway leading to fire and injuries of the passengers.
The wheel nuts are not securely tightened, which could result in the wheel nut coming loose while the vehicle is in motion, or the loss of a wheel. This could result in an accident and injuries.
SR/00476/26 ↗The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02936/25 ↗
Afficher 46 rappels de plus
The fixing screws on the front left and right ball joint mount on the front lower suspension arm may break. This could cause the ball joint mount to pivot and the affected wheel to change direction and hit the mudguard,…
SR/04357/25 ↗Texte complet
The fixing screws on the front left and right ball joint mount on the front lower suspension arm may break. This could cause the ball joint mount to pivot and the affected wheel to change direction and hit the mudguard, which may affect the steering capacity of the vehicle and cause an accident.
The connection for the auxiliary heating in the 48 V battery harness terminal may not be adequate. This issue could lead to the heating not functioning properly. In rare instances, there is a possibility of an electric…
SR/03373/25 ↗Texte complet
The connection for the auxiliary heating in the 48 V battery harness terminal may not be adequate. This issue could lead to the heating not functioning properly. In rare instances, there is a possibility of an electric arc and overheating, which might increase the risk of a fire in the vehicle.
The vehicle may have a faulty high-voltage battery, which could cause overheating and cause the battery or vehicle to catch fire.
SR/03304/25 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03153/25 ↗Texte complet
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Texte complet
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The low-pressure fuel line may touch the screw of the ignition coil. This contact may damage the fuel line and eventually lead to a fuel leak, which may cause the vehicle to catch fire.
SR/01778/25 ↗The headrests may not stay in the position they have been set in, due to defective lock slots on the headrest supports. In the event of an accident, they can come loose, which can compromise their protective function,…
SR/00884/25 ↗Texte complet
The headrests may not stay in the position they have been set in, due to defective lock slots on the headrest supports. In the event of an accident, they can come loose, which can compromise their protective function, increasing the risk of injuries.
Due to a weakness in the crimping interface of the quick coupling connector fitted to the high-pressure fuel pump, a leak may occur in the fuel pipe within the engine compartment. This can result in the vehicle catching…
SR/00445/25 ↗The front left or right ball joint mount on the front lower suspension arm may have defective fixing screws, which could break. Two missing screws will cause the ball joint mount to pivot and the affected wheel to…
SR/00050/25 ↗Texte complet
The front left or right ball joint mount on the front lower suspension arm may have defective fixing screws, which could break. Two missing screws will cause the ball joint mount to pivot and the affected wheel to change direction and hit the mudguard, which may affect the steering capacity of the vehicle, increasing the risk of an accident.
The subframe support can corrode, leading to cracks. This can result in the loss of structural integrity and the consequent loss of control of the vehicle.
A12/03137/24 ↗In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02824/24 ↗The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This…
A12/01705/24 ↗Texte complet
The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This increases the risk of fire in the vehicle.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗The traction battery can overheat due to faulty monitoring software and catch fire.
A12/01741/23 ↗The traction battery may overheat and cause a fire.
A12/01619/23 ↗The safety function of the charging cable may fail and not prevent the cable from overheating, creating a risk of fire.
A12/01621/23 ↗The traction battery can overheat due to faulty monitoring software and catch fire.
A12/01336/23 ↗The high voltage battery has a cell voltage mismatch. This could cause a fire.
A12/01350/22 ↗The high voltage battery has a cell voltage mismatch. This could cause fire.
A12/01343/22 ↗Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…
A12/00046/22 ↗Texte complet
Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01184/21 ↗Texte complet
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The welding of the tow bar may be faulty. As a result, the trailer coupling could break, increasing the risk of an accident.
A12/00646/21 ↗Due to an error in the manufacturing process, the seat rail and seat-belt attachment may be defective.This will lead to increased the risk of injury in the event of an accident.
A12/00601/21 ↗The vacuum pump may be damaged due to material abrasion of the cog belt.As a result, the braking assistance could be reduced or lost, increasing the risk of an accident.
A12/01505/20 ↗The trailer hitch may be defective.As a result, the trailer could become detached inadvertently, increasing the risk of an accident.
A12/00412/21 ↗The affected vehicles may have a crack in the rear steering knuckles. This could lead to a loss of control over the vehicle or to impaired driving stability, increasing the risk of an accident.
A12/01791/20 ↗The sub-frame may corrode and fracture due to defective anti-rust treatment.This can lead to loss of control over the vehicle, increasing the risk of an accident.
A12/01193/20 ↗The bolts attaching the trailer hitch can break.Consequently, the trailer will become detached, increasing the risk of an accident.
A12/00921/20 ↗The rear axle connection may be defective.This may affect the driving stability, increasing the risk of an accident.
A12/00744/20 ↗The two bolts attaching the trailer hitch can break.Consequently, the trailer will become detached, increasing the risk of an accident.
A12/00381/20 ↗Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.
A12/1594/19 ↗The lower part of the seatbelt on the backseats may not be attached. This will impair the seatbelt's restraining function, increasing the risk of injury in the event of a collision.
A12/1472/19 ↗The cylinder-housing oil gallery plug may not have been correctly tightened. As a consequence oil might leak which presents a skid hazard for following traffic.
A12/1364/18 ↗Several components of the chassis may not be correctly tightened. This could affect the suspension and the steering.
A12/1109/18 ↗The bolts attaching the tow bar may not be correctly tightened. Parts of the tow bar could detach and fall on the road.
A12/0646/18 ↗Engine overheating may lead to an oil leak. Engine failure while driving could lead to loss of control of the vehicle resulting in a crash.
A12/0399/18 ↗There is contact between a fuel hose and the aerodynamic screen located under the fuel tank. Over time, this could cause a fuel leak. Fuel leakage onto the road could cause another vehicle to lose control.
A12/0043/18 ↗null The starter motor supply terminal may come into contact with an engine component. This could lead to damage to the supply terminal and to a short circuit. As a result, it may be impossible to start the vehicle.
A12/1344/17 ↗null The fixing studs for the curtain airbags are not welded properly. This could cause a curtain airbag malfunction in the event of a lateral impact.
A12/0986/17 ↗null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of…
A12/0996/17 ↗Texte complet
null The power terminal on the starter is incorrectly positioned which could result in the electric starter cable being in contact with the exhaust gas recirculation valve. This could lead to wear of the insulation of the electric starter cable and the risk of a short-circuit occurring.
null The hinge pin of the doors and of the retaining clip for this axis might have been incorrectly positioned, which could make it difficult to open and close the doors. If the door falls during the opening, it cannot…
A12/0281/17 ↗Texte complet
null The hinge pin of the doors and of the retaining clip for this axis might have been incorrectly positioned, which could make it difficult to open and close the doors. If the door falls during the opening, it cannot be excluded that it could hurt a passer-by or the person opening the door from the outside.
null A possible fault with the seals at the end of the fuel hose intended for the fuel system of the additional compartment heater (available as an accessory) could lead to a fuel leak.
A12/0208/17 ↗null The upper support of the left rear spring of the suspension may crack or deform, which could affect the vehicle's road-handling characteristics and make it difficult for the driver to keep the vehicle under control.
A12/1022/16 ↗null Oil may leak from the turbocharger on to hot engine parts which could lead to a fire breaking out, even after the engine has been switched off.
A12/0437/16 ↗null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air…
A12/1317/15 ↗Texte complet
null In the case of negative exterior temperatures, and after repeated activation of the fuel heater, an electric connection on the cover of the fuel heater can overheat. This can cause the cover to melt, allowing air to enter the fuel system which could lead to stalling of the engine and loss of control of the car.
null The affected vehicles may exhibit friction wear on the driver's seat wiring harness, potentially causing an electrical malfunction or localised overheating and/or causing the driver's airbag to be triggered.
A12/1068/14 ↗