AutoDefects
Polski

Toyota Corolla / Auris 2021: niezawodność

o 78% mniej usterek mechanicznych niż w klasie

20 075 badań MOT egzemplarzy Toyota Corolla / Auris zarejestrowanych po raz pierwszy w 2021: 0,8% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 3,7%.

Usterki mechaniczne
0,8%
Mediana klasy, ten sam wiek i przebieg
3,7%
Negatywne badanie (dowolny powód)
10,8%
badań MOT
20 075
Akcje przywoławcze
2

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km11 1650,5%2,1%
50-100k km65331,2%4,7%
100-150k km17641,0%7,9%
150k+ km6131,8%9,7%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła0,2%
Hamulce0,4%
Silnik, wydech i emisja0,0%
Układ kierowniczy0,0%
Nadwozie, podwozie i korozja0,2%
Pasy i poduszki powietrzne0,1%
Oświetlenie i elektryka (eksploatacja)2,1%
Opony (eksploatacja)4,8%
Wycieraczki i szyba (eksploatacja)4,2%
Inne i tablice (eksploatacja)0,2%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • NHTSA (US)Poważne2020, 2021

    A short circuit may develop in the Occupant Classification System (OCS) sensor, preventing the front passenger air bag from deploying.

    Pełny tekst

    Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2020-2021 Avalon, Avalon Hybrid, Corolla, Highlander, Highlander Hybrid, RAV4, RAV4 Hybrid, Lexus ES350, Lexus RX350, Lexus RX450H, 2021 Sienna Hybrid, Lexus ES250, 2020-2022 Camry, Camry Hybrid, and ES300H vehicles. A short circuit may develop in the Occupant Classification System (OCS) sensor, preventing the front passenger air bag from deploying.

    23V865000 ↗
  • EU Safety GatePoważne2017–2022

    Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in…

    Pełny tekst

    Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire.

    A12/02637/23 ↗