AutoDefects
Deutsch

Toyota Corolla / Auris 2021: Zuverlässigkeit

78% weniger technische Mängel als die Klasse

20.075 MOT-Prüfungen von Toyota Corolla / Auris mit Erstzulassung 2021: 0,8% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 3,7%.

Technische Mängelquote
0,8%
Klassenmedian, gleiches Alter und gleiche Laufleistung
3,7%
Durchgefallen (jeder Grund)
10,8%
MOT-Prüfungen
20.075
Rückrufe
2

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km11.1650,5%2,1%
50-100k km6.5331,2%4,7%
100-150k km1.7641,0%7,9%
150k+ km6131,8%9,7%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder0,2%
Bremsen0,4%
Motor, Abgasanlage und Emissionen0,0%
Lenkung0,0%
Karosserie, Rahmen und Rost0,2%
Gurte und Airbags0,1%
Licht und Elektrik (Verschleiß)2,1%
Reifen (Verschleiß)4,8%
Wischer und Scheibe (Verschleiß)4,2%
Sonstiges und Kennzeichen (Verschleiß)0,2%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • NHTSA (US)Ernst2020, 2021

    A short circuit may develop in the Occupant Classification System (OCS) sensor, preventing the front passenger air bag from deploying.

    Volltext

    Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2020-2021 Avalon, Avalon Hybrid, Corolla, Highlander, Highlander Hybrid, RAV4, RAV4 Hybrid, Lexus ES350, Lexus RX350, Lexus RX450H, 2021 Sienna Hybrid, Lexus ES250, 2020-2022 Camry, Camry Hybrid, and ES300H vehicles. A short circuit may develop in the Occupant Classification System (OCS) sensor, preventing the front passenger air bag from deploying.

    23V865000 ↗
  • EU Safety GateErnst2017–2022

    Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in…

    Volltext

    Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire.

    A12/02637/23 ↗