Mercedes-Benz B-Class 2018: niezawodność
3986 badań MOT egzemplarzy Mercedes-Benz B-Class zarejestrowanych po raz pierwszy w 2018: 4,0% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 4,4%.
- Usterki mechaniczne
- 4,0%
- Mediana klasy, ten sam wiek i przebieg
- 4,4%
- Negatywne badanie (dowolny powód)
- 14,0%
- badań MOT
- 3986
- Akcje przywoławcze
- 7
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 1643 | 3,0% | 2,7% |
| 50-100k km | 1961 | 4,1% | 5,1% |
| 100-150k km | 324 | 6,8% | 7,7% |
| 150k+ km | 58 | 10,3% | 9,8% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of…
A12/00940/24 ↗Pełny tekst
The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of an accident.
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…
A12/00017/22 ↗Pełny tekst
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.
The front seats may not be sufficiently stable. As a result, the seat and its occupant could move more than expected in the event of a crash, leading to increased risk of injury.
A12/00732/21 ↗The welded joints fixing the frame of the front seats may not comply with the specifications. As a result they could fail in the event of a crash, causing the seat and its occupant to move more than expected, leading to…
A12/01146/20 ↗Pełny tekst
The welded joints fixing the frame of the front seats may not comply with the specifications. As a result they could fail in the event of a crash, causing the seat and its occupant to move more than expected, leading to increased risk of injuries.
The fixing screw connecting the base holder of the manual control device may not be correctly fitted. This can impair the control over the vehicle, increasing the risk of an accident.
A12/1794/19 ↗A bolt in the locking mechanism of the articulated trailer coupling is defective. It could break while a trailer is being towed and consequently the trailer could detach, thus increasing the risk of an accident for…
A12/0267/19 ↗Pełny tekst
A bolt in the locking mechanism of the articulated trailer coupling is defective. It could break while a trailer is being towed and consequently the trailer could detach, thus increasing the risk of an accident for following traffic.
Pokaż jeszcze 1 akcji
The calibration of the occupant classification system for the passenger seat may not be adequate. As a consequence, the installation of a child seat may not deactivate the passenger airbag as required. In the event of…
A12/1621/18 ↗Pełny tekst
The calibration of the occupant classification system for the passenger seat may not be adequate. As a consequence, the installation of a child seat may not deactivate the passenger airbag as required. In the event of an accident, the passenger airbag could therefore be deployed. This could increase the risk of injury to a child in a rear-facing child seat.