Mercedes-Benz B-Class 2018: Zuverlässigkeit
3.986 MOT-Prüfungen von Mercedes-Benz B-Class mit Erstzulassung 2018: 4,0% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 4,4%.
- Technische Mängelquote
- 4,0%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 4,4%
- Durchgefallen (jeder Grund)
- 14,0%
- MOT-Prüfungen
- 3.986
- Rückrufe
- 7
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 1.643 | 3,0% | 2,7% |
| 50-100k km | 1.961 | 4,1% | 5,1% |
| 100-150k km | 324 | 6,8% | 7,7% |
| 150k+ km | 58 | 10,3% | 9,8% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of…
A12/00940/24 ↗Volltext
The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of an accident.
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…
A12/00017/22 ↗Volltext
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.
The front seats may not be sufficiently stable. As a result, the seat and its occupant could move more than expected in the event of a crash, leading to increased risk of injury.
A12/00732/21 ↗The welded joints fixing the frame of the front seats may not comply with the specifications. As a result they could fail in the event of a crash, causing the seat and its occupant to move more than expected, leading to…
A12/01146/20 ↗Volltext
The welded joints fixing the frame of the front seats may not comply with the specifications. As a result they could fail in the event of a crash, causing the seat and its occupant to move more than expected, leading to increased risk of injuries.
The fixing screw connecting the base holder of the manual control device may not be correctly fitted. This can impair the control over the vehicle, increasing the risk of an accident.
A12/1794/19 ↗A bolt in the locking mechanism of the articulated trailer coupling is defective. It could break while a trailer is being towed and consequently the trailer could detach, thus increasing the risk of an accident for…
A12/0267/19 ↗Volltext
A bolt in the locking mechanism of the articulated trailer coupling is defective. It could break while a trailer is being towed and consequently the trailer could detach, thus increasing the risk of an accident for following traffic.
1 weitere Rückrufe anzeigen
The calibration of the occupant classification system for the passenger seat may not be adequate. As a consequence, the installation of a child seat may not deactivate the passenger airbag as required. In the event of…
A12/1621/18 ↗Volltext
The calibration of the occupant classification system for the passenger seat may not be adequate. As a consequence, the installation of a child seat may not deactivate the passenger airbag as required. In the event of an accident, the passenger airbag could therefore be deployed. This could increase the risk of injury to a child in a rear-facing child seat.