Hyundai Kona 2023: niezawodność
172 badań MOT egzemplarzy Hyundai Kona zarejestrowanych po raz pierwszy w 2023: 0,6% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 0,8%.
- Usterki mechaniczne
- 0,6%
- Mediana klasy, ten sam wiek i przebieg
- 0,8%
- Negatywne badanie (dowolny powód)
- 5,8%
- badań MOT
- 172
- Akcje przywoławcze
- 5
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 139 | 0,7% | 0,8% |
| 50-100k km | 30 | 0,0% | 0,9% |
| 100-150k km | 3 | 0,0% | —% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
A software error in the air bag control unit (ACU) may improperly deactivate the air bag system and seat belt pretensioners.
26V728000 ↗Pełny tekst
Hyundai Motor America (Hyundai) is recalling certain 2019-2022 Veloster N, 2019-2023 Kona Electric vehicles. A software error in the air bag control unit (ACU) may improperly deactivate the air bag system and seat belt pretensioners.
The battery monitoring software is defective and is unable to promptly detect thermal instability within the high-voltage battery leading to a fire.
SR/00934/26 ↗The vehicle's transmission software doesn't engage emergency mode when a fault occurs. This can lead to an unexpectedly severe deceleration, increasing the risk of accidents and injuries.
A12/01586/24 ↗The seat belt buckles in the back seat are faulty and do not lock, providing inadequate protection, increasing the risk of injury in case of an accident.
A12/01886/23 ↗The electronic controller for the Idle Stop & Go oil pump assembly may contain damaged electrical components that can cause the pump controller to overheat.
23V526000 ↗Pełny tekst
Hyundai Motor America (Hyundai) is recalling certain 2023-2024 Palisade Tucson, 2023 Sonata, Elantra, and Kona vehicles. The electronic controller for the Idle Stop & Go oil pump assembly may contain damaged electrical components that can cause the pump controller to overheat.