Hyundai Kona 2023: Zuverlässigkeit
172 MOT-Prüfungen von Hyundai Kona mit Erstzulassung 2023: 0,6% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 0,8%.
- Technische Mängelquote
- 0,6%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 0,8%
- Durchgefallen (jeder Grund)
- 5,8%
- MOT-Prüfungen
- 172
- Rückrufe
- 5
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 139 | 0,7% | 0,8% |
| 50-100k km | 30 | 0,0% | 0,9% |
| 100-150k km | 3 | 0,0% | —% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
A software error in the air bag control unit (ACU) may improperly deactivate the air bag system and seat belt pretensioners.
26V728000 ↗Volltext
Hyundai Motor America (Hyundai) is recalling certain 2019-2022 Veloster N, 2019-2023 Kona Electric vehicles. A software error in the air bag control unit (ACU) may improperly deactivate the air bag system and seat belt pretensioners.
The battery monitoring software is defective and is unable to promptly detect thermal instability within the high-voltage battery leading to a fire.
SR/00934/26 ↗The vehicle's transmission software doesn't engage emergency mode when a fault occurs. This can lead to an unexpectedly severe deceleration, increasing the risk of accidents and injuries.
A12/01586/24 ↗The seat belt buckles in the back seat are faulty and do not lock, providing inadequate protection, increasing the risk of injury in case of an accident.
A12/01886/23 ↗The electronic controller for the Idle Stop & Go oil pump assembly may contain damaged electrical components that can cause the pump controller to overheat.
23V526000 ↗Volltext
Hyundai Motor America (Hyundai) is recalling certain 2023-2024 Palisade Tucson, 2023 Sonata, Elantra, and Kona vehicles. The electronic controller for the Idle Stop & Go oil pump assembly may contain damaged electrical components that can cause the pump controller to overheat.