AutoDefects
Polski

BMW X5 2022: niezawodność

o 121% więcej usterek mechanicznych niż w klasie

304 badań MOT egzemplarzy BMW X5 zarejestrowanych po raz pierwszy w 2022: 3,0% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 1,3%.

Usterki mechaniczne
3,0%
Mediana klasy, ten sam wiek i przebieg
1,3%
Negatywne badanie (dowolny powód)
11,8%
badań MOT
304
Akcje przywoławcze
8

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km2303,0%0,9%
50-100k km732,7%2,7%
100-150k km10,0%—%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła1,0%
Hamulce0,7%
Silnik, wydech i emisja0,3%
Układ kierowniczy0,0%
Nadwozie, podwozie i korozja0,0%
Pasy i poduszki powietrzne1,0%
Oświetlenie i elektryka (eksploatacja)1,6%
Opony (eksploatacja)8,2%
Wycieraczki i szyba (eksploatacja)0,7%
Inne i tablice (eksploatacja)0,3%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety GatePoważne2020–2026

    The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay…

    Pełny tekst

    The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire.

    SR/02180/26 ↗
  • EU Safety GatePoważne2020–2024

    The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn…

    Pełny tekst

    The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire.

    SR/00551/26 ↗
  • EU Safety GatePoważne2020–2024

    The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn…

    Pełny tekst

    The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire.

    SR/00568/26 ↗
  • EU Safety GatePoważne2018–2025

    The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a…

    Pełny tekst

    The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking.

    SR/03823/25 ↗
  • EU Safety Gate2022–2024

    The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and…

    Pełny tekst

    The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident.

    SR/00053/25 ↗
  • EU Safety Gate2022–2024

    The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer…

    Pełny tekst

    The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident.

    A12/00996/24 ↗
Pokaż jeszcze 2 akcji
  • EU Safety GatePoważne2019–2022

    Defects in the winding of cell-internal foils in the high-voltage batteries can lead to the occurrence of increased self-discharge. This can cause high voltage cell modules to overheat, increasing the risk of fire.

    A12/01377/22 ↗
  • NHTSA (US)2019–2022

    The roof function control unit may be programmed incorrectly, allowing the sunroof to close without the key fob present inside the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor…

    Pełny tekst

    BMW of North America, LLC (BMW) is recalling certain 2022 4 Series Gran Coupe (430i, 430i xDrive, M440i xDrive); 2019-2022 X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5 M50i, X5M; 2021-2022 X5 xdrive45e; 2020-2022 X6 sDrive40i, X6 xDrive40i, X6 xDrive50i, X6M and 2019-2023 X7 xDrive40i, X7 xDrive50i, X7 M50i, X7 xDrive60i, X7 M60i, X7M, Alpina XB7 vehicles. The roof function control unit may be programmed incorrectly, allowing the sunroof to close without the key fob present inside the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 118, "Power-Operated Window Systems."

    22V267000 ↗