AutoDefects
Español

BMW X5 2022: fiabilidad

121 % más fallos mecánicos que su clase

304 inspecciones MOT de BMW X5 matriculados por primera vez en 2022: el 3,0 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 1,3 %.

Tasa de fallo mecánico
3,0%
Mediana de la clase, misma edad y kilometraje
1,3%
No pasó la MOT (cualquier motivo)
11,8%
inspecciones MOT
304
Llamadas a revisión
8

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km2303,0%0,9%
50-100k km732,7%2,7%
100-150k km10,0%—%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas1,0%
Frenos0,7%
Motor, escape y emisiones0,3%
Dirección0,0%
Carrocería, bastidor y corrosión0,0%
Cinturones y airbags1,0%
Luces y electricidad (desgaste)1,6%
Neumáticos (desgaste)8,2%
Escobillas y parabrisas (desgaste)0,7%
Otros y matrículas (desgaste)0,3%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2020–2026

    The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay…

    Texto completo

    The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire.

    SR/02180/26 ↗
  • EU Safety GateGrave2020–2024

    The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn…

    Texto completo

    The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire.

    SR/00551/26 ↗
  • EU Safety GateGrave2020–2024

    The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn…

    Texto completo

    The failure concerns the RSW22 starter, type RWT (reinforced for watertightness). Increased abrasion of the magnetic contact can lead to the formation of deposits at the lowest point of the relay interior. This in turn can increase the resistance of the relay contact, causing accidental ignition or even short circuits, possibly leading to a thermal reaction and fire.

    SR/00568/26 ↗
  • EU Safety GateGrave2018–2025

    The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a…

    Texto completo

    The engine starter’s electrical contacts may overheat and cause the vehicle to start improperly. Continued starting attempts can intensify the overheating and ignite surrounding components, potentially leading to a vehicle fire while driving or shortly after parking.

    SR/03823/25 ↗
  • EU Safety Gate2022–2024

    The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and…

    Texto completo

    The hollow shaft of the servomotor was not welded correctly. The weld may not be able to withstand high braking pressure build-up and may break. In this case, the reduced braking performance requires greater force and the braking distance may increase. In addition, the ABS and DSC brake control systems are not assisted. This increases the risk of an accident.

    SR/00053/25 ↗
  • EU Safety Gate2022–2024

    The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer…

    Texto completo

    The integrated braking system could be compromised, which could lead to an unexpected failure of the hydraulic braking assistance, thereby requiring greater pressure on the brake pedal. This can result in a longer braking distance, as well as failure of the Anti-lock Braking System (ABS) and the Dynamic Stability Control (DSC), increasing the risk of an accident.

    A12/00996/24 ↗
Mostrar 2 llamadas más
  • EU Safety GateGrave2019–2022

    Defects in the winding of cell-internal foils in the high-voltage batteries can lead to the occurrence of increased self-discharge. This can cause high voltage cell modules to overheat, increasing the risk of fire.

    A12/01377/22 ↗
  • NHTSA (US)2019–2022

    The roof function control unit may be programmed incorrectly, allowing the sunroof to close without the key fob present inside the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor…

    Texto completo

    BMW of North America, LLC (BMW) is recalling certain 2022 4 Series Gran Coupe (430i, 430i xDrive, M440i xDrive); 2019-2022 X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5 M50i, X5M; 2021-2022 X5 xdrive45e; 2020-2022 X6 sDrive40i, X6 xDrive40i, X6 xDrive50i, X6M and 2019-2023 X7 xDrive40i, X7 xDrive50i, X7 M50i, X7 xDrive60i, X7 M60i, X7M, Alpina XB7 vehicles. The roof function control unit may be programmed incorrectly, allowing the sunroof to close without the key fob present inside the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 118, "Power-Operated Window Systems."

    22V267000 ↗