AutoDefects
Français

Toyota Proace 2019 : fiabilité

22 % de défaillances mécaniques en moins que la catégorie

1 871 contrôles MOT de Toyota Proace immatriculées pour la première fois en 2019 : 9,5 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 12,2 %.

Taux de défaillance mécanique
9,5%
Médiane de la catégorie, même âge et kilométrage
12,2%
Recalés (toute raison)
24,2%
contrôles MOT
1 871
Rappels
13

Ce qui lâche selon le kilométrage

KilométrageContrôlesDéfaillance mécaniqueMédiane catégorie
0-50k km2605,4%5,9%
50-100k km8218,3%11,2%
100-150k km5169,7%13,7%
150k+ km27416,8%17,9%

Ce qui lâche sur cette année

OrganeDéfaillance mécanique
Suspension et roues2,0%
Freins4,6%
Moteur, échappement et émissions1,9%
Direction0,1%
Carrosserie, châssis et corrosion2,0%
Ceintures et airbags0,9%
Éclairage et électricité (usure)12,0%
Pneus (usure)6,0%
Essuie-glaces et pare-brise (usure)4,3%
Divers et plaques (usure)0,2%

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • EU Safety Gate2017–2021

    A calibration error in the Engine Electronic Control Unit (ECU) software may prevent the Malfunction Indicator Lamp (MIL) from activating when the Selective Catalytic Reduction (SCR) system and/or Diesel Particulate…

    Texte complet

    A calibration error in the Engine Electronic Control Unit (ECU) software may prevent the Malfunction Indicator Lamp (MIL) from activating when the Selective Catalytic Reduction (SCR) system and/or Diesel Particulate Filter (DPF) fails, risking undetected faults and resulting in emissions above the regulatory limits.

    SR/02983/25 ↗
  • EU Safety Gate2016–2022

    Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and…

    Texte complet

    Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and increase the risk of an accident.

    SR/02942/25 ↗
  • EU Safety Gate2018–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texte complet

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02656/25 ↗
  • EU Safety Gate2019–2022

    The telematics unit for e-Call may not work as required. The Public Safety Answering Points (PSAPs), the automatic callback function from the PSAP, to the vehicle does not work. The PSAP cannot automatically…

    Texte complet

    The telematics unit for e-Call may not work as required. The Public Safety Answering Points (PSAPs), the automatic callback function from the PSAP, to the vehicle does not work. The PSAP cannot automatically re-establish the connection with the vehicle if the initial connection has ended.This can hinder or delay emergency assistance, treatment of injuries.

    INFO/00118/23 ↗
  • EU Safety GateGrave2019–2021

    The underbody cover fails to stop flammable materials to accumulate under the engine, increasing the risk of fire.

    A12/00307/23 ↗
  • EU Safety Gate2018–2021

    Due to an error in the specific software for calibration of the electronic engine control unit (ECU), an incorrect value is provided when the data is processed by the vehicle.

    INFO/00012/22 ↗
Afficher 7 rappels de plus
  • EU Safety GateGrave2019–2021

    If there is a fuel leakage from the auxiliary heater, which could cause fuel to leak onto the road surface, the road could become slippery which could cause an incident.

    A11/00111/21 ↗
  • EU Safety Gate2016–2019

    The engine timing belt may wear out prematurely over time due to abrasive wear and/or excessive belt tension. As a result, the engine might stall during driving, increasing the risk of an accident.

    A12/00246/21 ↗
  • EU Safety Gate2019

    The rear seat's locking mechanism may not function properly. As a result, the seat may inadvertently slide in the event of an accident, increasing the risk of injury.

    A12/01822/20 ↗
  • EU Safety Gate2019, 2020

    The steering tips can break under specific driving conditions (e.g. passing through potholes, wheel impact). This can impair the steerability of the vehicle, increasing the risk of an accident.

    A12/01417/20 ↗
  • EU Safety Gate2019

    Several fixations on the rear axle component might not have been tightened correctly and can come loose. If this occurs, the vehicle might become difficult to control or brake fluid might leak, leading to braking…

    Texte complet

    Several fixations on the rear axle component might not have been tightened correctly and can come loose. If this occurs, the vehicle might become difficult to control or brake fluid might leak, leading to braking performance reduction. —

    A12/00448/20 ↗
  • EU Safety GateGrave2016–2019

    The rear brake tube is not tightly connected to the holding clip on the lower suspension arm.As a result, it may become damaged and leak brake fluid, reducing the braking performance of the vehicle and increasing the…

    Texte complet

    The rear brake tube is not tightly connected to the holding clip on the lower suspension arm.As a result, it may become damaged and leak brake fluid, reducing the braking performance of the vehicle and increasing the risk of accident.The shaft of the parking brake might have been incorrectly manufactured.As a result, the parking brake might not properly function and the vehicle might unintentionally move, increasing the risk of accident.The fuel tube can move against the ribs of the urea tank.As a result, it may become damaged and leak fuel, which might get ignited, increasing the risk of fire.An insufficient torque might have been applied to the seat belt fixation, seat belt anchor and ground cable bolts.As a result, the seat belt fixation and anchor might become loose, increasing the risk of injuries in the event of an accident or the ground cable might overheat, increasing the risk of fire.The mastic in the front left and right wheel arch panels might been applied incorrectly. As a result, water could filter and reach the airbag module, increasing the risk of accident or injuries in the event of an accident.

    A12/00010/19 ↗
  • EU Safety GateGrave2016–2019

    The seat belt on the front passenger seat may unbuckle unintentionally. As a result, the front seat passenger would not be secured in the event of an accident, increasing the risk of an injury.

    A12/1220/19 ↗