AutoDefects
Español

Toyota Proace 2019: fiabilidad

22 % menos fallos mecánicos que su clase

1871 inspecciones MOT de Toyota Proace matriculados por primera vez en 2019: el 9,5 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 12,2 %.

Tasa de fallo mecánico
9,5%
Mediana de la clase, misma edad y kilometraje
12,2%
No pasó la MOT (cualquier motivo)
24,2%
inspecciones MOT
1871
Llamadas a revisión
13

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km2605,4%5,9%
50-100k km8218,3%11,2%
100-150k km5169,7%13,7%
150k+ km27416,8%17,9%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas2,0%
Frenos4,6%
Motor, escape y emisiones1,9%
Dirección0,1%
Carrocería, bastidor y corrosión2,0%
Cinturones y airbags0,9%
Luces y electricidad (desgaste)12,0%
Neumáticos (desgaste)6,0%
Escobillas y parabrisas (desgaste)4,3%
Otros y matrículas (desgaste)0,2%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety Gate2017–2021

    A calibration error in the Engine Electronic Control Unit (ECU) software may prevent the Malfunction Indicator Lamp (MIL) from activating when the Selective Catalytic Reduction (SCR) system and/or Diesel Particulate…

    Texto completo

    A calibration error in the Engine Electronic Control Unit (ECU) software may prevent the Malfunction Indicator Lamp (MIL) from activating when the Selective Catalytic Reduction (SCR) system and/or Diesel Particulate Filter (DPF) fails, risking undetected faults and resulting in emissions above the regulatory limits.

    SR/02983/25 ↗
  • EU Safety Gate2016–2022

    Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and…

    Texto completo

    Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and increase the risk of an accident.

    SR/02942/25 ↗
  • EU Safety Gate2018–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texto completo

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02656/25 ↗
  • EU Safety Gate2019–2022

    The telematics unit for e-Call may not work as required. The Public Safety Answering Points (PSAPs), the automatic callback function from the PSAP, to the vehicle does not work. The PSAP cannot automatically…

    Texto completo

    The telematics unit for e-Call may not work as required. The Public Safety Answering Points (PSAPs), the automatic callback function from the PSAP, to the vehicle does not work. The PSAP cannot automatically re-establish the connection with the vehicle if the initial connection has ended.This can hinder or delay emergency assistance, treatment of injuries.

    INFO/00118/23 ↗
  • EU Safety GateGrave2019–2021

    The underbody cover fails to stop flammable materials to accumulate under the engine, increasing the risk of fire.

    A12/00307/23 ↗
  • EU Safety Gate2018–2021

    Due to an error in the specific software for calibration of the electronic engine control unit (ECU), an incorrect value is provided when the data is processed by the vehicle.

    INFO/00012/22 ↗
Mostrar 7 llamadas más
  • EU Safety GateGrave2019–2021

    If there is a fuel leakage from the auxiliary heater, which could cause fuel to leak onto the road surface, the road could become slippery which could cause an incident.

    A11/00111/21 ↗
  • EU Safety Gate2016–2019

    The engine timing belt may wear out prematurely over time due to abrasive wear and/or excessive belt tension. As a result, the engine might stall during driving, increasing the risk of an accident.

    A12/00246/21 ↗
  • EU Safety Gate2019

    The rear seat's locking mechanism may not function properly. As a result, the seat may inadvertently slide in the event of an accident, increasing the risk of injury.

    A12/01822/20 ↗
  • EU Safety Gate2019, 2020

    The steering tips can break under specific driving conditions (e.g. passing through potholes, wheel impact). This can impair the steerability of the vehicle, increasing the risk of an accident.

    A12/01417/20 ↗
  • EU Safety Gate2019

    Several fixations on the rear axle component might not have been tightened correctly and can come loose. If this occurs, the vehicle might become difficult to control or brake fluid might leak, leading to braking…

    Texto completo

    Several fixations on the rear axle component might not have been tightened correctly and can come loose. If this occurs, the vehicle might become difficult to control or brake fluid might leak, leading to braking performance reduction. —

    A12/00448/20 ↗
  • EU Safety GateGrave2016–2019

    The rear brake tube is not tightly connected to the holding clip on the lower suspension arm.As a result, it may become damaged and leak brake fluid, reducing the braking performance of the vehicle and increasing the…

    Texto completo

    The rear brake tube is not tightly connected to the holding clip on the lower suspension arm.As a result, it may become damaged and leak brake fluid, reducing the braking performance of the vehicle and increasing the risk of accident.The shaft of the parking brake might have been incorrectly manufactured.As a result, the parking brake might not properly function and the vehicle might unintentionally move, increasing the risk of accident.The fuel tube can move against the ribs of the urea tank.As a result, it may become damaged and leak fuel, which might get ignited, increasing the risk of fire.An insufficient torque might have been applied to the seat belt fixation, seat belt anchor and ground cable bolts.As a result, the seat belt fixation and anchor might become loose, increasing the risk of injuries in the event of an accident or the ground cable might overheat, increasing the risk of fire.The mastic in the front left and right wheel arch panels might been applied incorrectly. As a result, water could filter and reach the airbag module, increasing the risk of accident or injuries in the event of an accident.

    A12/00010/19 ↗
  • EU Safety GateGrave2016–2019

    The seat belt on the front passenger seat may unbuckle unintentionally. As a result, the front seat passenger would not be secured in the event of an accident, increasing the risk of an injury.

    A12/1220/19 ↗