AutoDefects
Deutsch

Jaguar E-PACE 2019: Zuverlässigkeit

48% mehr technische Mängel als die Klasse

11.257 MOT-Prüfungen von Jaguar E-PACE mit Erstzulassung 2019: 5,8% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 3,9%.

Technische Mängelquote
5,8%
Klassenmedian, gleiches Alter und gleiche Laufleistung
3,9%
Durchgefallen (jeder Grund)
13,3%
MOT-Prüfungen
11.257
Rückrufe
2

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km3.5223,4%2,6%
50-100k km6.7106,4%4,2%
100-150k km9439,5%5,9%
150k+ km827,3%7,5%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder0,5%
Bremsen2,8%
Motor, Abgasanlage und Emissionen2,5%
Lenkung0,0%
Karosserie, Rahmen und Rost0,1%
Gurte und Airbags0,1%
Licht und Elektrik (Verschleiß)1,3%
Reifen (Verschleiß)4,6%
Wischer und Scheibe (Verschleiß)4,0%
Sonstiges und Kennzeichen (Verschleiß)0,3%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2019

    One or more of the fasteners on the right-hand front seat frame assembly may be missing or incorrectly assembled.As a result, the seat will not have sufficient structural integrity, increasing the risk of an injury in…

    Volltext

    One or more of the fasteners on the right-hand front seat frame assembly may be missing or incorrectly assembled.As a result, the seat will not have sufficient structural integrity, increasing the risk of an injury in the event of an accident.

    A12/00377/20 ↗
  • EU Safety Gate2019–2021

    Due to manufacturing defect, the support wire grid between the inner and outer layers of the fuel injector rubber return pipe may not provide sufficient support, which may cause the pipe to bend and break over time. As…

    Volltext

    Due to manufacturing defect, the support wire grid between the inner and outer layers of the fuel injector rubber return pipe may not provide sufficient support, which may cause the pipe to bend and break over time. As a result, fuel could leak into the cold side of the motor compartment and onto the road surface, posing a risk to the following traffic.

    A12/01349/21 ↗