Toyota Prius 2018: reliability
15,750 MOT tests of Toyota Prius cars first registered in 2018: 3.8% failed for a mechanical defect; the class median at the same age and mileage is 10.1%.
- Mechanical failure rate
- 3.8%
- Class median, same age and mileage
- 10.1%
- Failed MOT (any reason)
- 13.0%
- MOT tests
- 15,750
- Recalls
- 6
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 1,490 | 1.3% | 3.7% |
| 50-100k km | 4,284 | 1.9% | 8.3% |
| 100-150k km | 2,850 | 3.7% | 10.3% |
| 150k+ km | 7,126 | 5.6% | 12.5% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
Specific transistors in the boost converter of the Intelligent Power Module (IPM) can be damaged by the high thermal stress caused by repeated driving under certain high-load driving patterns (e.g. from a stop, applying…
A12/01049/20 ↗Full text
Specific transistors in the boost converter of the Intelligent Power Module (IPM) can be damaged by the high thermal stress caused by repeated driving under certain high-load driving patterns (e.g. from a stop, applying nearly full throttle and then gradually further accelerating to full throttle).This may cause the hybrid system to be shut down without entering a failsafe mode. As a result the vehicle may lose motive power while driving at higher speeds, increasing the risk of an accident.
The accessory seat cover kit may not be installed correctly causing the seat covers not to tear as designed in the event of an airbag deployment. As a result, the cover could prevent the seat-mounted side airbag from…
A12/1601/19 ↗Full text
The accessory seat cover kit may not be installed correctly causing the seat covers not to tear as designed in the event of an airbag deployment. As a result, the cover could prevent the seat-mounted side airbag from deploying properly, increasing the risk of injury in the event of a crash.
The DC-DC converter may fail resulting in the auxiliary battery no longer receiving power from the converter, which may cause a loss of drive.
19V491000 ↗Full text
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018-2019 Prius C vehicles. The DC-DC converter may fail resulting in the auxiliary battery no longer receiving power from the converter, which may cause a loss of drive.
The engine wire harness has a cover attached where it is connected to the hybrid vehicle Power Control Unit. Due to assembly variation, a portion of the wire harness could contact the cover. If dust has accumulated on…
A12/1327/18 ↗Full text
The engine wire harness has a cover attached where it is connected to the hybrid vehicle Power Control Unit. Due to assembly variation, a portion of the wire harness could contact the cover. If dust has accumulated on the wire harness or the cover, vibration during vehicle use may cause the insulation on the wires to wear over time and expose the core wire, causing an electrical short circuit to occur between the damaged wires and generate heat. If sufficient heat is generated, there is an increased risk of fire.
A portion of the engine wire harness connected to the hybrid Power Control Unit (PCU), could contact the cover at this connection and wear, causing an electrical short circuit.
18V579000 ↗Full text
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2016-2018 Toyota Prius vehicles. A portion of the engine wire harness connected to the hybrid Power Control Unit (PCU), could contact the cover at this connection and wear, causing an electrical short circuit.
The front passenger air bag and recommended child occupant seating positions label may not have been attached during assembly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety…
18V176000 ↗Full text
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2018 Toyota Prius C vehicles sold in Puerto Rico. The front passenger air bag and recommended child occupant seating positions label may not have been attached during assembly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."