Renault Clio 2014: reliability
26,250 MOT tests of Renault Clio cars first registered in 2014: 35.2% failed for a mechanical defect; the class median at the same age and mileage is 22.6%.
- Mechanical failure rate
- 35.2%
- Class median, same age and mileage
- 22.6%
- Failed MOT (any reason)
- 45.3%
- MOT tests
- 26,250
- Recalls
- 5
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 1,227 | 13.4% | 8.7% |
| 50-100k km | 9,047 | 30.0% | 17.6% |
| 100-150k km | 11,009 | 38.6% | 24.5% |
| 150k+ km | 4,967 | 42.8% | 30.8% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
null The central pivot pin of the back structure of the rear bench-seat does not have sufficient mechanical strength. In the event of a violent front impact to the vehicle, heavy items of luggage in the boot could…
A12/1518/17 ↗Full text
null The central pivot pin of the back structure of the rear bench-seat does not have sufficient mechanical strength. In the event of a violent front impact to the vehicle, heavy items of luggage in the boot could consequently be projected into the cabin causing injuries to the occupants.
null The front wheel arch may be incorrectly installed. As a result, the brake hose may come into contact with the front wheel arch, causing wear of the brake hose by fretting. If the brake hose breaks and the brake…
A12/0606/16 ↗Full text
null The front wheel arch may be incorrectly installed. As a result, the brake hose may come into contact with the front wheel arch, causing wear of the brake hose by fretting. If the brake hose breaks and the brake fluid leaks out, the performance of braking could be compromised.
null Due to insufficient tightening of the wheel bolts, a wheel may be lost while driving.
A12/0087/16 ↗null Improper positioning of the rear part of the front wheel arch liner can cause it to come into contact with the flexible brake hose, which may reduce braking efficiency.
A12/0949/15 ↗null There is a risk of aggression of the front flexible brake hose by the underwing plastic protectors (Clio IV) and/or a risk of escape of the hydraulic pistons from the rear drum brake cylinder (Clio IV Berlina).…
A12/1270/14 ↗Full text
null There is a risk of aggression of the front flexible brake hose by the underwing plastic protectors (Clio IV) and/or a risk of escape of the hydraulic pistons from the rear drum brake cylinder (Clio IV Berlina). This could lead to a brake fluid leak and consequent loss of braking efficiency.