Porsche Boxster / Cayman 2012: reliability
1,469 MOT tests of Porsche Boxster / Cayman cars first registered in 2012: 5.1% failed for a mechanical defect; the class median at the same age and mileage is 8.1%.
- Mechanical failure rate
- 5.1%
- Class median, same age and mileage
- 8.1%
- Failed MOT (any reason)
- 9.5%
- MOT tests
- 1,469
- Recalls
- 2
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 331 | 3.0% | 4.8% |
| 50-100k km | 797 | 3.6% | 7.9% |
| 100-150k km | 281 | 8.5% | 10.2% |
| 150k+ km | 60 | 20.0% | 20.4% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The cradle side panels on the rear axle may be defective, which could result in the breakage of one of the two slots for the suspension wishbones on the side panel of the cradle.This could impair the wheel control and…
A12/01387/21 ↗Full text
The cradle side panels on the rear axle may be defective, which could result in the breakage of one of the two slots for the suspension wishbones on the side panel of the cradle.This could impair the wheel control and result in a loss of control over the vehicle, increasing the risk of an accident. The product does not meet the requirements set out in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles
0; AND MODEL YEAR 2012 BOXSTER (INCLUDING S AND SPYDER); CAYMAN (INCLUDING S AND R); 911 CARRERA (INCLUDING S, GTS, 4, 4S, AND 4 GTS); 911 TARGA 4 AND TARGA 4S; AND 911 TURBO AND TURBO S MODELS MANUFACTURED FROM MAY 31,…
11V409000 ↗Full text
PORSCHE IS RECALLING CERTAIN MODEL YEAR 2011 911 SPEEDSTER AND 911 GTS RS 4.0; AND MODEL YEAR 2012 BOXSTER (INCLUDING S AND SPYDER); CAYMAN (INCLUDING S AND R); 911 CARRERA (INCLUDING S, GTS, 4, 4S, AND 4 GTS); 911 TARGA 4 AND TARGA 4S; AND 911 TURBO AND TURBO S MODELS MANUFACTURED FROM MAY 31, 2011, THROUGH JUNE 10, 2011. THERE IS A POSSIBILITY THAT THE MOUNTING HOLES IN THE SEAT BELT ANCHOR PLATES FITTED TO THE VEHICLE ARE TOO SMALL. IF THE HOLE DIAMETER IS TOO SMALL, THE ANCHOR PLATE MAY NOT BE ABLE TO ROTATE ABOUT THE FASTENING BOLT AS DESIGNED.