Nissan Juke 2015: reliability
37,898 MOT tests of Nissan Juke cars first registered in 2015: 26.3% failed for a mechanical defect; the class median at the same age and mileage is 17.7%.
- Mechanical failure rate
- 26.3%
- Class median, same age and mileage
- 17.7%
- Failed MOT (any reason)
- 33.9%
- MOT tests
- 37,898
- Recalls
- 5
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 2,510 | 8.1% | 7.2% |
| 50-100k km | 16,352 | 20.8% | 14.5% |
| 100-150k km | 14,554 | 32.1% | 20.7% |
| 150k+ km | 4,482 | 37.8% | 25.6% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The child lock on the rear doors could be defective.As a result, it might be possible to open the door even when the child lock is activated, increasing the risk of an accident.
A12/01207/20 ↗Nissan North America, Inc. (Nissan) is recalling certain 2015-2017 Nissan Juke Nismo RS vehicles. Due to a problem within the brake master cylinder, brake fluid may leak into the brake booster, reducing brake…
18V086000 ↗Full text
Nissan North America, Inc. (Nissan) is recalling certain 2015-2017 Nissan Juke Nismo RS vehicles. Due to a problem within the brake master cylinder, brake fluid may leak into the brake booster, reducing brake performance.
null The sensor of the rear oxygen sensor might fail and does not set a Diagnostic Trouble Code (DTC) in case of inappropriate content of the exhaust gases. In such cases, the user is not warned through the Malfunction…
A12/0879/16 ↗Full text
null The sensor of the rear oxygen sensor might fail and does not set a Diagnostic Trouble Code (DTC) in case of inappropriate content of the exhaust gases. In such cases, the user is not warned through the Malfunction Indicator Light (MIL) on the dashboard.
null An incorrect calibration setting in the Engine Control Module (ECM) software may cause miscalculation of sulfur oxide (SOx) levels captured within the Lean NOx Trap (LNT) component of the exhaust’s Diesel…
A12/0267/16 ↗Full text
null An incorrect calibration setting in the Engine Control Module (ECM) software may cause miscalculation of sulfur oxide (SOx) levels captured within the Lean NOx Trap (LNT) component of the exhaust’s Diesel Particulate Filter (DPF). This miscalculation could, with extended operation under certain driving conditions, affect the purge process applied to remove SOx particles from the DPF-LNT. In this condition, the capacity of the DPF-LNT may become saturated and, as a result, the nitrogen oxide (NOx) emissions from the vehicle could exceed the permitted level.
null The push engine start switch may remain in the pressed position and not return after switching the engine on. If the vehicle continues to be driven in this condition, the emergency engine stop function may operate…
A12/0850/15 ↗Full text
null The push engine start switch may remain in the pressed position and not return after switching the engine on. If the vehicle continues to be driven in this condition, the emergency engine stop function may operate and cause the engine to stop unexpectedly.