Land Rover Range Rover Evoque 2021: reliability
13,783 MOT tests of Land Rover Range Rover Evoque cars first registered in 2021: 2.7% failed for a mechanical defect; the class median at the same age and mileage is 2.0%.
- Mechanical failure rate
- 2.7%
- Class median, same age and mileage
- 2.0%
- Failed MOT (any reason)
- 10.8%
- MOT tests
- 13,783
- Recalls
- 8
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 9,742 | 2.1% | 1.7% |
| 50-100k km | 3,810 | 3.9% | 2.8% |
| 100-150k km | 209 | 8.1% | 4.3% |
| 150k+ km | 22 | 9.1% | —% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The vehicle’s engine may fail to restart after driving in electric vehicle (EV) mode due to a software problem in the inverter control module when the high-voltage (HV) battery charge decreases. This could result in a…
SR/02677/26 ↗Full text
The vehicle’s engine may fail to restart after driving in electric vehicle (EV) mode due to a software problem in the inverter control module when the high-voltage (HV) battery charge decreases. This could result in a loss of motive power, increasing the risk of an accident and injuries.
The DC-DC converter may malfunction due to an electrical overload that can occur during high power demand. Additionally, a software error can cause the DC-DC converter to stop functioning at vehicle start-up under…
26V599000 ↗Full text
Jaguar Land Rover North America, LLC (Land Rover) is recalling certain 2019-2024 Land Rover Range Rover Sport, 2020-2024 Land Rover Range Rover Evoque, Land Rover Range Rover, Land Rover Discovery Sport, Land Rover Defender, 2021-2024 Land Rover Range Rover Velar, Jaguar E-Pace, F-Pace, and Land Rover Discovery vehicles. The DC-DC converter may malfunction due to an electrical overload that can occur during high power demand. Additionally, a software error can cause the DC-DC converter to stop functioning at vehicle start-up under certain circumstances. Failure of the DC-DC converter will result in the loss of 12-Volt system charging and can lead to complete loss of drive power and exterior lighting.
A defective module has been installed in the high-voltage battery, which may cause it to overheat and lead to a fire.
SR/01970/26 ↗Insufficient electrical load balancing during times of high demand can lead to a current overload condition and malfunction of the DCDC converter. A failure of the DC-DC converter will result in a loss of 12-Volt system…
26V248000 ↗Full text
Jaguar Land Rover North America, LLC (Land Rover) is recalling certain 2021-2024 Land Rover Range Rover Velar and Land Rover Discovery, 2020-2023 Land Rover Range Rover Evoque, 2019-2024 Land Rover Range Rover Sport, 2020-2024 Land Rover Range Rover, 2020 Land Rover Discovery Sport, 2020-2024 Land Rover Defender, 2021-2024 Jaguar F-Pace, and 2021-2022 Jaguar E-Pace mild-hybrid electric vehicles (MHEVs). Insufficient electrical load balancing during times of high demand can lead to a current overload condition and malfunction of the DCDC converter. A failure of the DC-DC converter will result in a loss of 12-Volt system charging and can lead to complete loss of drive power and exterior lighting.
The passenger airbag module may tear during deployment as a result of improper folding during the airbag assembly process. In case the airbag is torn, it will not provide adequate protection to occupants and may…
SR/00298/26 ↗Full text
The passenger airbag module may tear during deployment as a result of improper folding during the airbag assembly process. In case the airbag is torn, it will not provide adequate protection to occupants and may increase the risk of injury in a crash. Hot gases could escape, causing burns to occupants.
The passenger air bag may tear during deployment.
25V454000 ↗Full text
Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2020–2025 Range Rover Evoque vehicles. The passenger air bag may tear during deployment.
Show 2 more recalls
Due to manufacturing defect, the support wire grid between the inner and outer layers of the fuel injector rubber return pipe may not provide sufficient support, which may cause the pipe to bend and break over time.As a…
A12/01335/21 ↗Full text
Due to manufacturing defect, the support wire grid between the inner and outer layers of the fuel injector rubber return pipe may not provide sufficient support, which may cause the pipe to bend and break over time.As a result, fuel could leak into the cold side of the motor compartment and onto the road surface, posing a risk to the following traffic.
Due to a manufacturing problem, the vehicle-sensitive locking mechanism may not lock as intended when the vehicle decelerates or is tilted to a significant extent. In addition, since the moulded ribs have not been fully…
A12/00935/21 ↗Full text
Due to a manufacturing problem, the vehicle-sensitive locking mechanism may not lock as intended when the vehicle decelerates or is tilted to a significant extent. In addition, since the moulded ribs have not been fully formed in the injection-moulding machine, the sensor axis in the mechanism may become detached or dislodged. In the event of sudden braking before an accident or if the vehicle is too tilted, the occupant of the right-hand front-row seat may not be restrained as intended, and is therefore exposed to an increased risk of injury.