Jeep Grand Cherokee 2020: reliability
68 MOT tests of Jeep Grand Cherokee cars first registered in 2020: 7.4% failed for a mechanical defect; the class median at the same age and mileage is 3.1%.
- Mechanical failure rate
- 7.4%
- Class median, same age and mileage
- 3.1%
- Failed MOT (any reason)
- 16.2%
- MOT tests
- 68
- Recalls
- 11
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 41 | 4.9% | 2.5% |
| 50-100k km | 24 | 12.5% | 3.9% |
| 100-150k km | 3 | 0.0% | 5.1% |
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
An incorrectly fitted rear coil spring may detach from the vehicle, which could affect vehicle handling and create a hazard for following traffic. This increases the risk of accidents and injuries.
SR/02123/26 ↗The separator of the high voltage battery may be damaged. This may lead to cell failure and increase the risk of fire.
SR/00750/26 ↗The high-voltage battery pack can contain cells having separator damage. A damaged separator can lead to a very rapid chemical chain reaction in the battery. This can cause the battery to overheat, which can start a…
SR/00961/25 ↗Full text
The high-voltage battery pack can contain cells having separator damage. A damaged separator can lead to a very rapid chemical chain reaction in the battery. This can cause the battery to overheat, which can start a fire in the vehicle.
The exhaust-gas recirculation (EGR) cooler can be susceptible to thermal fatigue. The exhaust gases can interact with air and other hydrocarbons in the system, which can cause combustion in the inlet manifold. This can…
SR/03729/24 ↗Full text
The exhaust-gas recirculation (EGR) cooler can be susceptible to thermal fatigue. The exhaust gases can interact with air and other hydrocarbons in the system, which can cause combustion in the inlet manifold. This can lead the vehicle to catch fire.
The upper control arm clamping screw may have been damaged during vehicle assembly. If it breaks, the clamping force between the control arm ball joint and the steering knuckle could be lost. This could cause the wheel…
A12/01644/24 ↗Full text
The upper control arm clamping screw may have been damaged during vehicle assembly. If it breaks, the clamping force between the control arm ball joint and the steering knuckle could be lost. This could cause the wheel to detach, creating a risk of accidents and injuries.
The rear coil springs may be defective and can become detached while the vehicle is in motion, creating a risk of an accident.
A12/02184/23 ↗
Show 5 more recalls
0L Diesel engines. The crankshaft position sensor tone wheel may delaminate, causing the engine to lose its ability to synchronize the fuel injector pulses and cam shaft timing, possibly resulting in an engine stall.
23V411000 ↗Full text
Chrysler (FCA US, LLC) is recalling certain 2014-2019 Ram 1500 and 2014-2020 Jeep Grand Cherokee vehicles equipped with 3.0L Diesel engines. The crankshaft position sensor tone wheel may delaminate, causing the engine to lose its ability to synchronize the fuel injector pulses and cam shaft timing, possibly resulting in an engine stall.
0L diesel engines. A high pressure fuel pump (HPFP) failure may introduce internal debris into the fuel system, potentially resulting in fuel starvation.
22V406000 ↗Full text
Chrysler (FCA US, LLC) is recalling certain 2014-2020 Jeep Grand Cherokee, and 2014-2019 Ram 1500 vehicles equipped with 3.0L diesel engines. A high pressure fuel pump (HPFP) failure may introduce internal debris into the fuel system, potentially resulting in fuel starvation.
Faulty software may result in the deactivation of the driver, passenger and knee airbags. This will increase the risk of injury in the event of an accident.
A12/00187/22 ↗Due to the use of defective materials, the crankshaft position sensor’s signalling may be incorrect. As a result the engine will not be able to function.
INFO/00118/21 ↗4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of…
20V191000 ↗Full text
Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."