Hyundai i30 / Elantra GT 2009: reliability
8,592 MOT tests of Hyundai i30 / Elantra GT cars first registered in 2009: 31.6% failed for a mechanical defect; the class median at the same age and mileage is 27.2%.
- Mechanical failure rate
- 31.6%
- Class median, same age and mileage
- 27.2%
- Failed MOT (any reason)
- 46.4%
- MOT tests
- 8,592
- Recalls
- 5
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 283 | 12.0% | 9.3% |
| 50-100k km | 1,434 | 18.5% | 18.5% |
| 100-150k km | 2,822 | 30.4% | 26.9% |
| 150k+ km | 4,053 | 38.4% | 31.6% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may propel pieces of the inflator and airbag module into the occupant compartment.…
SR/00017/26 ↗Full text
The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may propel pieces of the inflator and airbag module into the occupant compartment. This could increase the risk of injury.
The vehicles might experience an electrical short circuit on the ABS/ESC module, which can disable these systems.This will impair the vehicle's braking performance, increasing the risk of an accident.
A12/00827/20 ↗The airbags may be inadvertently deployed in the event of an impact on the lower part of the vehicle body where the airbag control unit (ACU) is located. This can increase the risk of injuries.
A12/00129/20 ↗null The vehicle becomes impossible to steer as a result of the loosening of a bolt on the steering column universal joint.
A12/1609/14 ↗null A connection failure on the brake pedal switch may create a problem with the illumination of the rear brake lights. The symptom can be either delayed illumination or no illumination during braking when brake pedal…
A12/0096/14 ↗Full text
null A connection failure on the brake pedal switch may create a problem with the illumination of the rear brake lights. The symptom can be either delayed illumination or no illumination during braking when brake pedal is activated.