AutoDefects
English

Honda CR-V 2012: reliability

50% fewer mechanical failures than the class

12,455 MOT tests of Honda CR-V cars first registered in 2012: 13.0% failed for a mechanical defect; the class median at the same age and mileage is 26.2%.

Mechanical failure rate
13.0%
Class median, same age and mileage
26.2%
Failed MOT (any reason)
24.7%
MOT tests
12,455
Recalls
7

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km1596.3%10.7%
50-100k km1,9447.6%17.0%
100-150k km4,39910.6%22.8%
150k+ km5,95316.7%32.1%

What fails on this year

SystemMechanical fail
Suspension and wheels7.4%
Brakes4.2%
Engine, exhaust and emissions0.8%
Steering1.9%
Body, chassis and corrosion1.5%
Seat belts and airbags0.4%
Lights and electrics (wear)11.5%
Tyres (wear)5.2%
Wipers and windscreen (wear)3.4%
Other and plates (wear)0.2%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious2010–2015

    A defect in the gas generator of the front-seat passenger airbag leads to uncontrolled inflation and the release of metal fragments when the airbag is activated. This can cause the occupants of the vehicle to be injured.

    A12/0063/19 ↗
  • EU Safety GateSerious2004–2015

    null Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In this event, metal fragments could be propelled into the passenger compartment, potentially causing injury to a vehicle…

    Full text

    null Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In this event, metal fragments could be propelled into the passenger compartment, potentially causing injury to a vehicle occupant.

    A12/0474/16 ↗
  • EU Safety GateSerious2000–2029

    null The driver's airbag inflator may produce excessive internal pressure if deployed. The increased pressure may cause the inflator to rupture propelling metal fragments causing injury to the vehicle occupants.

    A12/0725/15 ↗
  • EU Safety Gate2012, 2013

    null Sixteen inch brake discs may have been installed to one or both sides of the vehicle rather than the correct seventeen inch brake disc.

    A12/0351/14 ↗
  • NHTSA (US)2012, 2013

    During sub-freezing temperatures, the brake-shift interlock blocking mechanism may become slow and allow the gear selector to be moved from the Park position without pressing the brake pedal. As such, these vehicles…

    Full text

    Honda is recalling certain model year 2012-2013 CR-V, Odyssey, and model year 2013 Acura RDX vehicles. During sub-freezing temperatures, the brake-shift interlock blocking mechanism may become slow and allow the gear selector to be moved from the Park position without pressing the brake pedal. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard 114, "Theft Protection and Rollaway Prevention."

    13V143000 ↗
  • NHTSA (US)2012

    These vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification." The incorrect values for Gross Vehicle Weight Rating, Gross Axle Weight Rating front and rear, tire size, and rim size were…

    Full text

    Honda is recalling certain model year 2012 CR-V, equipped with the LX trim level and manufactured from August 30, 2012, to August 31, 2012. These vehicles fail to comply with the requirements of 49 CFR Part 567, "Certification." The incorrect values for Gross Vehicle Weight Rating, Gross Axle Weight Rating front and rear, tire size, and rim size were specified on the safety certification label.

    12V501000 ↗
Show 1 more recalls
  • NHTSA (US)2012

    If the manual or power door lock is activated while an interior front door handle is being operated by an occupant, the cable connecting the interior door handle to the door latch mechanism may become loose and move out…

    Full text

    Honda is recalling certain model year 2012 Honda CR-V and model year 2013 Acura ILX vehicles. If the manual or power door lock is activated while an interior front door handle is being operated by an occupant, the cable connecting the interior door handle to the door latch mechanism may become loose and move out of position. There is a possibility that the cable can move far enough out of position to prevent the door from properly latching.

    12V338000 ↗