AutoDefects
English

Citroën C4 Picasso / SpaceTourer 2015: reliability

30% more mechanical failures than the class

636 MOT tests of Citroën C4 Picasso / SpaceTourer cars first registered in 2015: 20.4% failed for a mechanical defect; the class median at the same age and mileage is 15.8%.

Mechanical failure rate
20.4%
Class median, same age and mileage
15.8%
Failed MOT (any reason)
34.0%
MOT tests
636
Recalls
6

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km229.1%5.5%
50-100k km16714.4%11.9%
100-150k km27022.2%15.6%
150k+ km17724.9%21.0%

What fails on this year

SystemMechanical fail
Suspension and wheels7.9%
Brakes4.9%
Engine, exhaust and emissions1.9%
Steering3.3%
Body, chassis and corrosion7.2%
Seat belts and airbags0.5%
Lights and electrics (wear)15.7%
Tyres (wear)7.6%
Wipers and windscreen (wear)4.6%
Other and plates (wear)0.2%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Full text

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2014–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Full text

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01186/21 ↗
  • EU Safety Gate2012–2015

    Overheating of the engine may occur due to a problem with the engine control software. Overheating of the engine may lead to engine failure.

    A12/0492/18 ↗
  • EU Safety Gate2014, 2015

    null The fixing screws for the front suspension wishbones could break, which could make it difficult for the driver to control the vehicle.

    A12/1646/16 ↗
  • EU Safety Gate2015

    null A defect in the locking mechanism may result in unintended unlocking or opening of the doors.

    A12/0352/16 ↗
  • EU Safety Gate2015

    null A problem with an internal component of the electric power steering electronic management device could result in a reduction in the steering assistance when driving or during manoeuvres.

    A12/1580/15 ↗