BMW i3 2015: reliability
1,914 MOT tests of BMW i3 cars first registered in 2015: 8.8% failed for a mechanical defect; the class median at the same age and mileage is 15.6%.
- Mechanical failure rate
- 8.8%
- Class median, same age and mileage
- 15.6%
- Failed MOT (any reason)
- 17.6%
- MOT tests
- 1,914
- Recalls
- 5
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 289 | 5.5% | 8.9% |
| 50-100k km | 839 | 7.3% | 14.2% |
| 100-150k km | 572 | 10.0% | 20.9% |
| 150k+ km | 214 | 15.9% | 15.9% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
Unbelted, small adult, drivers may be at a higher risk of neck injury in the event of a frontal crash. These vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208,…
17V720000 ↗Full text
BMW of North America, LLC (BMW) is recalling certain 2014-2018 BMW i3 electric and hybrid electric vehicles. Unbelted, small adult, drivers may be at a higher risk of neck injury in the event of a frontal crash. These vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
null Inappropriate routing might cause a leakage on the fuel tank ventilation line over time. As a result, fuel vapours may get into the engine compartment resulting in the risk of a fire.
A12/0428/17 ↗The fuel tank vent line may rub against the ribbed wire protection sleeve of the battery positive (B+) cable, creating a hole in the vent line and causing a fuel vapor leak.
17V088000 ↗Full text
BMW of North America, LLC (BMW) is recalling certain 2014-2017 i3 REx hybrid electric vehicles. The fuel tank vent line may rub against the ribbed wire protection sleeve of the battery positive (B+) cable, creating a hole in the vent line and causing a fuel vapor leak.
null The power electronics have not been calibrated properly which might increase the recuperation torque during the vehicle's deceleration. In this case, the vehicle might skid in slippery road conditions.
A12/0092/16 ↗Due to a manufacturing error, the passenger frontal air bag may not deploy properly in a low speed crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS)…
15V628000 ↗Full text
BMW of North America, LLC (BMW) is recalling certain model year 2014-2016 MINI Cooper S and MINI Cooper two-door vehicles, 2015-2016 MINI John Cooper Works and MINI Cooper S and MINI Cooper four-door vehicles and 2014-2015 BMW i3 vehicles. Due to a manufacturing error, the passenger frontal air bag may not deploy properly in a low speed crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."