AutoDefects
English

BMW 3 Series 2001: reliability

14% fewer mechanical failures than the class

5,190 MOT tests of BMW 3 Series cars first registered in 2001: 26.7% failed for a mechanical defect; the class median at the same age and mileage is 31.1%.

Mechanical failure rate
26.7%
Class median, same age and mileage
31.1%
Failed MOT (any reason)
35.5%
MOT tests
5,190
Recalls
9

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km5510.9%10.9%
50-100k km43519.5%18.8%
100-150k km1,14222.6%28.2%
150k+ km3,55829.2%33.9%

What fails on this year

SystemMechanical fail
Suspension and wheels13.9%
Brakes13.6%
Engine, exhaust and emissions5.0%
Steering2.0%
Body, chassis and corrosion3.3%
Seat belts and airbags4.4%
Lights and electrics (wear)14.8%
Tyres (wear)6.0%
Wipers and windscreen (wear)6.4%
Other and plates (wear)0.7%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious1998–2006

    The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal…

    Full text

    The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries.

    SR/00583/26 ↗
  • EU Safety GateSerious1999–2005

    The propellant in the passenger airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing…

    Full text

    The propellant in the passenger airbag can deteriorate due to high humidity and temperature variations. In the event of an accident in which the airbag deploys, this could result in fragments from the inflator casing coming loose and injuring the vehicle’s occupants.

    A12/01882/23 ↗
  • NHTSA (US)Serious1999–2001

    These vehicles are equipped with driver-side air bag inflators that were previously inspected, but not replaced under recall numbers 19V-851, 19V852, or 19V-853. Due to a manufacturing issue, the NADI inflator may…

    Full text

    BMW of North America, LLC (BMW) is recalling certain 2000-2001 BMW 3 Series (323Ci, 325Ci, 328Ci and 330Ci), 1999-2001 323i, 328i, 330i, 330xi, and 2000 323i, 328i stationwagon vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles are equipped with driver-side air bag inflators that were previously inspected, but not replaced under recall numbers 19V-851, 19V852, or 19V-853. Due to a manufacturing issue, the NADI inflator may absorb moisture, causing the inflator to explode or the air bag cushion to underinflate.

    21V401000 ↗
  • NHTSA (US)Serious2000–2005

    These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

    Full text

    BMW of North America, LLC (BMW) is recalling certain 2000-2005 323iT, 325iT, 325xiT, 320i, 323i, 325i, 325xi, 328i, 330i and 330xi and 2000-2006 323Ci, 325Ci, 328Ci, 330Ci, M3 Coupe, 323Cic, 325Cic, 330Cic, and M3 Convertible vehicles equipped with non-desiccated frontal Takata PSAN inflators and PSPI passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

    20V018000 ↗
  • EU Safety GateSerious1999–2003

    The gas generator on the driver side airbag could burst in the event of airbag activation if it had been exposed to high air humidity, high temperatures and considerable temperature fluctuations over several years. This…

    Full text

    The gas generator on the driver side airbag could burst in the event of airbag activation if it had been exposed to high air humidity, high temperatures and considerable temperature fluctuations over several years. This could result in metal parts being discharged, increasing the risk of injury of the vehicle occupants. No information

    A12/00017/19 ↗
  • NHTSA (US)Serious1999–2001

    These vehicles may have received a replacement driver air bag as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag…

    Full text

    BMW of North America, LLC (BMW) is recalling certain 1999-2001 323i, 325i, 328i and 330i and 2000-2001 323Ci, 325Ci, 328Ci, 330Ci, 323iT, and 325iT vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles may have received a replacement driver air bag as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag cushion to underinflate.

    19V853000 ↗
Show 3 more recalls
  • NHTSA (US)Serious2000–2006

    BMW of North America, LLC (BMW) is recalling certain model year 2000 323i sedans, coupes, convertibles, and Sports Wagons; 2000 328i sedans and coupes; 2001-2005 325i sedans, coupes, convertibles, and Sport Wagons;…

    Full text

    BMW of North America, LLC (BMW) is recalling certain model year 2000 323i sedans, coupes, convertibles, and Sports Wagons; 2000 328i sedans and coupes; 2001-2005 325i sedans, coupes, convertibles, and Sport Wagons; 2001-2005 325xi sedans and Sports Wagons; 2006 325i coupes and convertibles; 2001-2006 330i sedans, coupes, and convertibles; 2001-2005 330xi sedans; and 2001-2006 M3 coupes and convertibles to address a safety defect in the passenger side frontal air bag which may produce excessive internal pressure that could cause the air bag inflator to rupture upon deployment of the air bag.

    14V428000 ↗
  • EU Safety GateSerious1999–2003

    null If the driver's airbag is deployed, the inflator might burst if it was subject to high air humidity, high temperatures and substantial temperature fluctuations over a number of years. This may result in the…

    Full text

    null If the driver's airbag is deployed, the inflator might burst if it was subject to high air humidity, high temperatures and substantial temperature fluctuations over a number of years. This may result in the ejection of metal parts, which could cause injury or death to the driver and the passengers.

    A12/0266/17 ↗
  • EU Safety GateSerious1999–2006

    null The front passenger-side inflators could create excessive internal pressure during airbag deployment after long-term exposure to high, absolute humidity environments. In a worst-case scenario, the inflator may…

    Full text

    null The front passenger-side inflators could create excessive internal pressure during airbag deployment after long-term exposure to high, absolute humidity environments. In a worst-case scenario, the inflator may rupture, possibly causing injury. Even if the inflator does not rupture, due to the specific design of the front passenger-side airbag module with its integrated inflator, any excessive internal pressure of the inflator could potentially result in an increased risk of airbag-induced injuries in a deployment event.

    A12/1207/14 ↗