AutoDefects
English

BMW 3 Series 1998: reliability

3% fewer mechanical failures than the class

2,034 MOT tests of BMW 3 Series cars first registered in 1998: 22.5% failed for a mechanical defect; the class median at the same age and mileage is 23.1%.

Mechanical failure rate
22.5%
Class median, same age and mileage
23.1%
Failed MOT (any reason)
32.0%
MOT tests
2,034
Recalls
2

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km2520.0%—%
50-100k km15815.2%12.7%
100-150k km39523.0%23.0%
150k+ km1,45623.2%24.3%

What fails on this year

SystemMechanical fail
Suspension and wheels11.2%
Brakes9.5%
Engine, exhaust and emissions8.0%
Steering2.6%
Body, chassis and corrosion3.9%
Seat belts and airbags3.2%
Lights and electrics (wear)14.6%
Tyres (wear)4.2%
Wipers and windscreen (wear)4.5%
Other and plates (wear)0.9%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety GateSerious1998–2006

    The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal…

    Full text

    The driver airbag inflator may malfunction due to long-term degradation. In this case, if the airbag is deployed in an accident, the internal pressure in the inflator may be too high. The inflator could burst. Metal fragments may cause injuries.

    SR/00583/26 ↗
  • EU Safety GateSerious1997–2000

    The vehicles affected may have been fitted with Takata non-azide driver inflator (NADI) gas generators in which inadequate sealing on the gas generator could allow the ingress of moisture and thus result in the…

    Full text

    The vehicles affected may have been fitted with Takata non-azide driver inflator (NADI) gas generators in which inadequate sealing on the gas generator could allow the ingress of moisture and thus result in the degradation of the propellant. If the airbag deploys, this could cause the gas generator to underinflate or to burst. In the case of under inflation the protective effect is not given. In case of overpressure deployment metal parts can enter the vehicle interior, this could cause serious or fatal injuries to occupants of the vehicle.

    A12/00852/20 ↗