Audi Q7 2019: reliability
4,660 MOT tests of Audi Q7 cars first registered in 2019: 4.7% failed for a mechanical defect; the class median at the same age and mileage is 4.7%.
- Mechanical failure rate
- 4.7%
- Class median, same age and mileage
- 4.7%
- Failed MOT (any reason)
- 12.0%
- MOT tests
- 4,660
- Recalls
- 13
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 688 | 2.9% | 2.9% |
| 50-100k km | 3,045 | 4.8% | 4.8% |
| 100-150k km | 849 | 5.5% | 5.7% |
| 150k+ km | 78 | 7.7% | 7.6% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The cell modules of the high-voltage battery could overheat during charging which can lead to a fire.
SR/03859/25 ↗Alteration of the rear axle’s toe and/or camber values lead to increased and uneven wear on the rear tyres, and if worn down to its carcass may suffer a sudden loss of pressure. This can lead to loss of traction and may…
A12/00504/22 ↗Full text
Alteration of the rear axle’s toe and/or camber values lead to increased and uneven wear on the rear tyres, and if worn down to its carcass may suffer a sudden loss of pressure. This can lead to loss of traction and may affect vehicle handling, increasing the risk of an accident.
The vehicles are equipped with control software regarded as unauthorised by the competent authorities.
A12/01220/21 ↗The nuts on the eccentric bolt of the rear-axle spring-link control arm may break due to stress corrosion.As a result, the rear axle could move in the wrong direction, in an uncontrollable manner at high speeds.
INFO/00138/21 ↗Volkswagen Group of America, Inc. (Audi) is recalling certain 2018-2020 Audi Q7 vehicles. The padding on the vehicle's C-pillar may not absorb enough impact in the event of a crash.
20V658000 ↗An oil line in the automatic gearbox may have a manufacturing defect. Consequently, oil may leak out onto the road, posing a riskto the following traffic.
A12/00997/20 ↗
Show 7 more recalls
The joint on the discharge nozzle of the gas generator for the curtain airbag might have been inappropriately welded. In the event of an accident triggering the curtain air bag, the joint could fail impairing the proper…
A12/00624/20 ↗Full text
The joint on the discharge nozzle of the gas generator for the curtain airbag might have been inappropriately welded. In the event of an accident triggering the curtain air bag, the joint could fail impairing the proper inflation of the airbag, increasing the risk of injuries.
The screw connection between the steering shaft and the steering box may not have been tightened sufficiently and may loosen over time. This will impair the vehicle’s steerability, increasing the risk of an accident.
A12/00547/20 ↗Possible defect in the locking mechanism on the front head restraints may cause them to unintentionally shift in height when placed under pressure. This could impair the protective effect of head restraints in the event…
A12/00465/20 ↗Full text
Possible defect in the locking mechanism on the front head restraints may cause them to unintentionally shift in height when placed under pressure. This could impair the protective effect of head restraints in the event of an accident, increasing the risk of injuries.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2019 Audi Q8 and 2017-2019 Audi Q7 vehicles. The bolt connecting the steering shaft to the steering gear may loosen, possibly resulting in a loss of…
20V149000 ↗Full text
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2019 Audi Q8 and 2017-2019 Audi Q7 vehicles. The bolt connecting the steering shaft to the steering gear may loosen, possibly resulting in a loss of steering control.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2019 Audi Q7 vehicles. In the event of a crash, the side curtain air bags may not properly inflate.
20V093000 ↗Due to the incompatibility of the control software with the heating film used for the front camera on the windscreen, significant overheating may occur when the heating element is controlled after the ignition is…
A12/00070/19 ↗Full text
Due to the incompatibility of the control software with the heating film used for the front camera on the windscreen, significant overheating may occur when the heating element is controlled after the ignition is switched on or at low temperatures. This may lead to a smouldering and increase the risk of the vehicle catching fire.
Volkswagen Group of America, Inc. (Audi) is recalling certain 2019 Q7, Q8, S5 Cabriolet, and S5 Sportback vehicles. The front shock absorber forks may develop cracks allowing the shock absorbers to loosen.
19V114000 ↗