Volkswagen Passat 2007: niezawodność
7990 badań MOT egzemplarzy Volkswagen Passat zarejestrowanych po raz pierwszy w 2007: 31,2% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 32,7%.
- Usterki mechaniczne
- 31,2%
- Mediana klasy, ten sam wiek i przebieg
- 32,7%
- Negatywne badanie (dowolny powód)
- 40,7%
- badań MOT
- 7990
- Akcje przywoławcze
- 16
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 5 | 20,0% | —% |
| 50-100k km | 143 | 16,8% | 18,0% |
| 100-150k km | 545 | 30,5% | 26,1% |
| 150k+ km | 7297 | 31,5% | 33,4% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The driver airbag's gas generator may be faulty, resulting in uncontrolled inflation and the release of metal fragments. This increases the risk of injuries to the occupants.
A12/00923/24 ↗The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it can result in fragments from the inflator injuring the vehicle's occupants.
SR/00793/25 ↗Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2017-2019 Beetle, Beetle Convertible, 2012-2014 Passat, 2017 Passat Wagon, and 2006-2007 Passat Sedan vehicles. The driver's side frontal air bag…
24V834000 ↗Pełny tekst
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2017-2019 Beetle, Beetle Convertible, 2012-2014 Passat, 2017 Passat Wagon, and 2006-2007 Passat Sedan vehicles. The driver's side frontal air bag inflator may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it can result in fragments from the inflator injuring the vehicle's occupants.
A12/02703/24 ↗The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.
A12/02686/24 ↗The airbag propellant may be faulty. In the event of an accident this can lead to the release of fragments from the inflator housing, increasing the risk of injury to the occupants.
A12/01380/23 ↗
Pokaż jeszcze 9 akcji
The airbag propellant may deteriorate over time. In the event of an accident this can lead to the release of fragments of the front airbag from the generator housing, increasing the risk of injury.
A12/01485/22 ↗The propellant used in the airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling.…
INFO/00087/21 ↗Pełny tekst
The propellant used in the airbag inflator may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity, high temperatures and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
The vehicles affected may have been fitted with Takata gas generators which could allow the ingress of moisture and thus result in the degradation of the propellant. If the airbag deploys, this could cause the gas…
A12/01892/20 ↗Pełny tekst
The vehicles affected may have been fitted with Takata gas generators which could allow the ingress of moisture and thus result in the degradation of the propellant. If the airbag deploys, this could cause the gas generator to burst, causing metal parts to enter the vehicle's interior, causing injuries to the occupants of the vehicle.
Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not…
A12/00222/20 ↗Pełny tekst
Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not correctly modified for street use.
The vehicles may have been fitted with an incorrect driver airbag during a components replacement. The airbag has not been tested and approved for these vehicles and might therefore not operate as intended.
A12/1292/18 ↗Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2006-2007 Volkswagen Passat sedan and wagon vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the…
18V247000 ↗Pełny tekst
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2006-2007 Volkswagen Passat sedan and wagon vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2009-2014 Volkswagen CC, 2010-2014 Golf, 2010-2014 Eos, 2007-2010 Passat Sedan and Wagon, and 2012-2014 Passat vehicles. Upon deployment of the…
18V148000 ↗Pełny tekst
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2009-2014 Volkswagen CC, 2010-2014 Golf, 2010-2014 Eos, 2007-2010 Passat Sedan and Wagon, and 2012-2014 Passat vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2009-2016 Volkswagen CC, 2006-2010 Passat and Passat Wagon vehicles. Interruption of electrical power to the fuel pump control module may cause the…
17V509000 ↗Pełny tekst
Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2009-2016 Volkswagen CC, 2006-2010 Passat and Passat Wagon vehicles. Interruption of electrical power to the fuel pump control module may cause the fuel pump to fail.
null Corrosion on the front gas tank may reduce the thickness of the gas tank wall. Insufficient thickness of the tank wall poses the risk that the gas tank may burst.
A12/1312/16 ↗