AutoDefects
Polski

Peugeot 3008 2018: niezawodność

o 47% więcej usterek mechanicznych niż w klasie

18 622 badań MOT egzemplarzy Peugeot 3008 zarejestrowanych po raz pierwszy w 2018: 11,6% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 7,9%.

Usterki mechaniczne
11,6%
Mediana klasy, ten sam wiek i przebieg
7,9%
Negatywne badanie (dowolny powód)
19,6%
badań MOT
18 622
Akcje przywoławcze
12

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km28335,5%3,9%
50-100k km11 40011,9%7,8%
100-150k km372714,4%10,6%
150k+ km66218,0%12,3%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła4,6%
Hamulce4,2%
Silnik, wydech i emisja1,0%
Układ kierowniczy0,5%
Nadwozie, podwozie i korozja2,5%
Pasy i poduszki powietrzne0,8%
Oświetlenie i elektryka (eksploatacja)3,6%
Opony (eksploatacja)5,3%
Wycieraczki i szyba (eksploatacja)3,7%
Inne i tablice (eksploatacja)0,1%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety GatePoważne2008–2026

    Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…

    Pełny tekst

    Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.

    SR/01379/26 ↗
  • EU Safety GatePoważne2008–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02936/25 ↗
  • EU Safety Gate2008–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Pełny tekst

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02658/25 ↗
  • EU Safety Gate2008–2022

    In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/02824/24 ↗
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety Gate2008–2019

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…

    Pełny tekst

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/00046/22 ↗
Pokaż jeszcze 6 akcji
  • EU Safety Gate2008–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Pełny tekst

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01184/21 ↗
  • EU Safety Gate2016–2020

    The welding of the tow bar may be faulty. As a result, the trailer coupling could break, increasing the risk of an accident.

    A12/00646/21 ↗
  • EU Safety Gate2008–2037

    Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.

    A12/1594/19 ↗
  • EU Safety Gate2018

    The cylinder-housing oil gallery plug may not have been correctly tightened. As a consequence oil might leak which presents a skid hazard for following traffic.

    A12/1364/18 ↗
  • EU Safety Gate2018

    Several components of the chassis may not be correctly tightened. This could affect the suspension and the steering.

    A12/1109/18 ↗
  • EU Safety Gate2017, 2018

    The bolts attaching the tow bar may not be correctly tightened. Parts of the tow bar could detach and fall on the road.

    A12/0646/18 ↗