MINI Hatch (Cooper / One) 2019: niezawodność
50 520 badań MOT egzemplarzy MINI Hatch (Cooper / One) zarejestrowanych po raz pierwszy w 2019: 2,2% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 5,1%.
- Usterki mechaniczne
- 2,2%
- Mediana klasy, ten sam wiek i przebieg
- 5,1%
- Negatywne badanie (dowolny powód)
- 12,2%
- badań MOT
- 50 520
- Akcje przywoławcze
- 4
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 28 975 | 1,8% | 3,5% |
| 50-100k km | 19 934 | 2,6% | 7,1% |
| 100-150k km | 1454 | 4,3% | 9,5% |
| 150k+ km | 157 | 9,6% | 14,3% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The high-voltage battery can short-circuit, causing the battery to overheat and the vehicle to catch fire, even when it is parked.
A12/02681/24 ↗A spherical-collar disk is missing on the tie rod end of the steering gear. Consequently, the tie rod might wear off and break, leading to a loss of wheel control and increasing the risk of accident.
A12/1588/19 ↗The steering gear tie rod may have been assembled incorrectly, which may result in excessive wear of the tie rod end, eventually causing it to break.
19V601000 ↗Pełny tekst
BMW of North America, LLC (BMW) is recalling certain 2018-2019 BMW X1 sDrive28i, X1 xDrive28i, 2019 X2 xDrive28i, MINI Cooper S Convertible, Countryman, and John Cooper Works Countryman vehicles. The steering gear tie rod may have been assembled incorrectly, which may result in excessive wear of the tie rod end, eventually causing it to break.
The crankshaft sensor may be equipped with incorrect firmware, preventing the sensor from properly processing input from the crankshaft reluctor ring, possibly resulting in a vehicle stall. On September 12, 2018, BMW…
18V465000 ↗Pełny tekst
BMW of North America, LLC (BMW) is recalling certain 2018 BMW 540d xDrive vehicles. The crankshaft sensor may be equipped with incorrect firmware, preventing the sensor from properly processing input from the crankshaft reluctor ring, possibly resulting in a vehicle stall. On September 12, 2018, BMW expanded the recall to a total of 5,309 vehicles including certain 2018-2019 BMW 540d xDrive, 230i M240i, M240i xDrive, X2 sDrive28i, X2 xDrive28i, X1 sDrive28i, X1 xDrive28i, 330i, 330i xDrive, 340i, 340i xDrive, 330i xDrive Gran Turismo, 530i, 530i xDrive, 540i, 540i xDrive, 530e, 530e xDrive, 640i xDrive Gran Turismo, 330e, 2019 430i Gran Coupe, 430i xDrive Gran Coupe, 440i Gran Coupe, 440i xDrive Gran Coupe, 430i, 430i xDrive, 440i, 440i xDrive, 740i, 740i xDrive, MINI Cooper, Cooper S, JCW, MINI Countryman (Cooper, Cooper All4, Cooper S, Cooper S All4, JCW All4), and MINI Clubman (Cooper, Cooper S, Cooper All4, Cooper S All4, JCW All4) vehicles.