Land Rover Defender 2015: niezawodność
6520 badań MOT egzemplarzy Land Rover Defender zarejestrowanych po raz pierwszy w 2015: 9,6% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 8,4%.
- Usterki mechaniczne
- 9,6%
- Mediana klasy, ten sam wiek i przebieg
- 8,4%
- Negatywne badanie (dowolny powód)
- 20,2%
- badań MOT
- 6520
- Akcje przywoławcze
- 5
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 2056 | 3,4% | 3,6% |
| 50-100k km | 2612 | 9,6% | 8,8% |
| 100-150k km | 1247 | 16,0% | 12,4% |
| 150k+ km | 605 | 18,2% | 14,3% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The front stabilizer does not meet specifications and is inadequate for the use on the vehicle. The road handling may be negatively affected, creating a risk of an accident.
A12/01487/23 ↗null A defect with the brake flexible hose can cause chafing and loss of brake fluid. This may lead to reduced braking power.
A12/0902/17 ↗null Excessively brittle bolts were installed in certain fittings used for the front and rear wheel hub assemblies. There is consequently a risk of the bolts breaking which could lead to other components being damaged.…
A12/0208/16 ↗Pełny tekst
null Excessively brittle bolts were installed in certain fittings used for the front and rear wheel hub assemblies. There is consequently a risk of the bolts breaking which could lead to other components being damaged. This could result in the front brake disc breaking or could undermine the stability of the vehicle during braking.
null The front axle tube could fracture over a period of time. If not identified, this could result in the detachment of the wheel and hub assembly from the vehicle and increase the risk of an accident.
A12/1279/14 ↗null The front axle tube could fracture over a period of time. If not identified, this could result in the detachment of the wheel and hub assembly from the vehicle and increase the risk of an accident.
A12/1280/14 ↗