AutoDefects
Polski

BMW X1 2017: niezawodność

o 45% mniej usterek mechanicznych niż w klasie

13 930 badań MOT egzemplarzy BMW X1 zarejestrowanych po raz pierwszy w 2017: 4,7% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 8,6%.

Usterki mechaniczne
4,7%
Mediana klasy, ten sam wiek i przebieg
8,6%
Negatywne badanie (dowolny powód)
14,1%
badań MOT
13 930
Akcje przywoławcze
7

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km15581,7%4,0%
50-100k km71443,8%7,9%
100-150k km41686,3%10,5%
150k+ km10608,4%12,4%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła2,4%
Hamulce1,7%
Silnik, wydech i emisja0,6%
Układ kierowniczy0,0%
Nadwozie, podwozie i korozja0,3%
Pasy i poduszki powietrzne0,1%
Oświetlenie i elektryka (eksploatacja)4,4%
Opony (eksploatacja)5,1%
Wycieraczki i szyba (eksploatacja)2,2%
Inne i tablice (eksploatacja)0,1%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety GatePoważne2003–2018

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/02573/24 ↗
  • EU Safety GatePoważne2016, 2017

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/02833/24 ↗
  • EU Safety GatePoważne2016–2019

    A spherical-collar disk is missing on the tie rod end of the steering gear. Consequently, the steering gear might break due to excessive wear, leading to a loss of steering control, increasing the risk of accident.

    A12/1491/19 ↗
  • NHTSA (US)2016–2019

    In the event of a crash where the occupants head contacts the B-pillar, the pillar may not absorb an adequate amount of the impact. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle…

    Pełny tekst

    BMW of North America, LLC (BMW) is recalling certain 2016-2019 X1 sDrive28i and X1 xDrive28i vehicles. In the event of a crash where the occupants head contacts the B-pillar, the pillar may not absorb an adequate amount of the impact. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 201, "Occupant Protection in Interior Impact."

    19V349000 ↗
  • EU Safety Gate2017

    null A faulty connecting socket on the dual clutch transmission could lead to the gears switching to neutral. It would then be impossible to change gear or start the engine once the vehicle has stopped.

    A12/1292/17 ↗
  • EU Safety GatePoważne2016, 2017

    null The necessary opening lines in the area of the passenger airbag cover may not have been machined correctly. In the event of an accident, the passenger airbag may consequently not be able to unfold correctly,…

    Pełny tekst

    null The necessary opening lines in the area of the passenger airbag cover may not have been machined correctly. In the event of an accident, the passenger airbag may consequently not be able to unfold correctly, increasing the risk of injury for the passenger.

    A12/0203/17 ↗
Pokaż jeszcze 1 akcji
  • NHTSA (US)Poważne2016, 2017

    The vehicle-sensitive locking mechanism of the seat belt Emergency Locking Retractor (ELR) for the driver's seat may not lock as designed. As such, these vehicles fail to comply with the requirements of the Federal…

    Pełny tekst

    BMW of North America, LLC (BMW) is recalling certain model year 2016-2017 X1 sDrive28i, X1 xDrive28i, MINI Hardtop 4 Door Cooper, Mini Hardtop 4 Door Cooper S, MINI Cooper Clubman, and Cooper S Clubman, 2017 Rolls-Royce Ghost, and 2016 528i vehicles. The vehicle-sensitive locking mechanism of the seat belt Emergency Locking Retractor (ELR) for the driver's seat may not lock as designed. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) number 209, "Seat Belt Assemblies."

    16V747000 ↗