Peugeot 308 2018 : fiabilité
8 507 contrôles MOT de Peugeot 308 immatriculées pour la première fois en 2018 : 11,2 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 8,3 %.
- Taux de défaillance mécanique
- 11,2%
- Médiane de la catégorie, même âge et kilométrage
- 8,3%
- Recalés (toute raison)
- 22,1%
- contrôles MOT
- 8 507
- Rappels
- 11
Ce qui lâche selon le kilométrage
| Kilométrage | Contrôles | Défaillance mécanique | Médiane catégorie |
|---|---|---|---|
| 0-50k km | 1 380 | 4,7% | 3,7% |
| 50-100k km | 4 689 | 10,8% | 8,3% |
| 100-150k km | 1 713 | 14,7% | 10,3% |
| 150k+ km | 725 | 18,1% | 12,5% |
Ce qui lâche sur cette année
Rappels officiels
Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…
SR/01379/26 ↗Texte complet
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02936/25 ↗The vehicle’s exhaust gases temperature is too low, making the catalytic converter less efficient. This may lead to excessive emissions, posing a risk to the environment.
SR/03174/25 ↗The upper anchorages of the seatbelts in the second row of seats may break. This may reduce the retractor’s ability to restrain the occupants during a possible impact, leading to injuries.
SR/02874/25 ↗Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Texte complet
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02824/24 ↗
Afficher 5 rappels de plus
The ISOFIX clips on the right rear seat may be incorrectly welded. There may be no restraining effect provided by the ISOFIX lower anchorage system and a child seat may not be sufficiently secured, creating a risk of…
A12/02540/23 ↗Texte complet
The ISOFIX clips on the right rear seat may be incorrectly welded. There may be no restraining effect provided by the ISOFIX lower anchorage system and a child seat may not be sufficiently secured, creating a risk of injury in the event of an accident.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…
A12/00046/22 ↗Texte complet
Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01184/21 ↗Texte complet
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The cylinder-housing oil gallery plug may not have been correctly tightened. As a consequence oil might leak which presents a skid hazard for following traffic.
A12/1364/18 ↗