AutoDefects
Français

Peugeot 208 2021 : fiabilité

Dans la moyenne de la catégorie

14 661 contrôles MOT de Peugeot 208 immatriculées pour la première fois en 2021 : 2,8 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 2,8 %.

Taux de défaillance mécanique
2,8%
Médiane de la catégorie, même âge et kilométrage
2,8%
Recalés (toute raison)
12,3%
contrôles MOT
14 661
Rappels
14

Ce qui lâche selon le kilométrage

KilométrageContrôlesDéfaillance mécaniqueMédiane catégorie
0-50k km11 4782,0%1,9%
50-100k km2 9615,9%5,9%
100-150k km2028,4%8,0%
150k+ km2010,0%9,6%

Ce qui lâche sur cette année

OrganeDéfaillance mécanique
Suspension et roues1,3%
Freins1,3%
Moteur, échappement et émissions0,2%
Direction0,1%
Carrosserie, châssis et corrosion0,1%
Ceintures et airbags0,1%
Éclairage et électricité (usure)1,4%
Pneus (usure)4,6%
Essuie-glaces et pare-brise (usure)5,3%
Divers et plaques (usure)0,1%

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • EU Safety GateGrave2008–2026

    The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient…

    Texte complet

    The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient clearance and possible contact between these components can lead to water infiltration, causing an electric arc, that could trigger a thermal event, such as overheating, which may lead to fire.

    SR/00819/26 ↗
  • EU Safety GateGrave2008–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02936/25 ↗
  • EU Safety Gate2008–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texte complet

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02658/25 ↗
  • EU Safety Gate2008–2024

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the…

    Texte complet

    The aluminium of the EBS valve block may not fully cast around the valves. This can lead to an internal leak of brake fluid (from one or more of the 12 valve seats) resulting in a reduction of the fluid level and the deactivation of stability control due to damage to the pressure sensor. The brake fluid could come into contact with the printed circuit board and result in the deactivation of all control functions (including the anti-lock system and electronic brake force distribution).

    SR/02104/25 ↗
  • EU Safety Gate2008–2023

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…

    Texte complet

    The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.

    SR/01450/25 ↗
  • EU Safety Gate2008–2022

    In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/02824/24 ↗
Afficher 8 rappels de plus
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety GateGrave2021, 2022

    Due to damage to the heating/ventilation/air conditioning (HVAC) harness caused by contact with the clutch pedal, the air conditioning may be activated automatically. This could lead to a fire as a result of a short…

    Texte complet

    Due to damage to the heating/ventilation/air conditioning (HVAC) harness caused by contact with the clutch pedal, the air conditioning may be activated automatically. This could lead to a fire as a result of a short circuit in the wires.

    A12/00439/23 ↗
  • EU Safety Gate2020, 2021

    The vehicle may inadvertently accelerate approximately 30 km/h above the set cruise-control speed when cruise control and the ECO mode are activated. This could increase the risk of an accident.

    A12/00332/23 ↗
  • EU Safety Gate2020–2022

    The locking nuts of the steering tie rods may not be properly tightened. This could lead to loss of control over the vehicle, creating a risk of an accident.

    A12/00246/23 ↗
  • EU Safety GateGrave2021

    The fuel line can rub against other components, leading to fuel leaks, which create a risk of fire.

    A12/01315/22 ↗
  • EU Safety Gate2021

    Improperly tightened rear axle components can result in the loss or damage of several parts (rod for the wheel and the chassis, brake caliper, rear axle fixing, ABS sensor, brake housing, brake housing support). This…

    Texte complet

    Improperly tightened rear axle components can result in the loss or damage of several parts (rod for the wheel and the chassis, brake caliper, rear axle fixing, ABS sensor, brake housing, brake housing support). This can lead to a loss of driving stability, increasing the risk of an accident.

    A11/00055/22 ↗
  • EU Safety Gate2021

    The fastenings on the rear axle are tightened with incorrect torques. This may lead to loosening of connections, deterioration in braking performance, loss of control over the vehicle and even to a loss of a wheel,…

    Texte complet

    The fastenings on the rear axle are tightened with incorrect torques. This may lead to loosening of connections, deterioration in braking performance, loss of control over the vehicle and even to a loss of a wheel, thereby endangering the surrounding traffic.

    A12/00532/22 ↗
  • EU Safety Gate2008–2037

    Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.

    A12/1594/19 ↗