AutoDefects
Français

Mercedes-Benz A-Class 2016 : fiabilité

35 % de défaillances mécaniques en plus que la catégorie

37 966 contrôles MOT de Mercedes-Benz A-Class immatriculées pour la première fois en 2016 : 11,7 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 8,6 %.

Taux de défaillance mécanique
11,7%
Médiane de la catégorie, même âge et kilométrage
8,6%
Recalés (toute raison)
22,2%
contrôles MOT
37 966
Rappels
9

Ce qui lâche selon le kilométrage

KilométrageContrôlesDéfaillance mécaniqueMédiane catégorie
0-50k km1 8904,4%2,8%
50-100k km15 3188,9%6,6%
100-150k km15 55013,1%9,8%
150k+ km5 20818,2%13,2%

Ce qui lâche sur cette année

OrganeDéfaillance mécanique
Suspension et roues6,0%
Freins3,5%
Moteur, échappement et émissions2,3%
Direction0,1%
Carrosserie, châssis et corrosion0,3%
Ceintures et airbags1,2%
Éclairage et électricité (usure)4,4%
Pneus (usure)8,7%
Essuie-glaces et pare-brise (usure)3,3%
Divers et plaques (usure)0,4%

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • EU Safety Gate2012–2020

    The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate…

    Texte complet

    The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate and the panel could become detached from the vehicle, posing a risk to other road users.

    A12/00730/21 ↗
  • EU Safety GateGrave2016–2020

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…

    Texte complet

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.

    A12/00017/22 ↗
  • EU Safety Gate2016, 2017

    A bore hole in the universal joint on the steering shaft may have incorrect size. As a result, there could be play between the bearing fitted into the bore hole and the universal joint, which could cause the joint to…

    Texte complet

    A bore hole in the universal joint on the steering shaft may have incorrect size. As a result, there could be play between the bearing fitted into the bore hole and the universal joint, which could cause the joint to become detached over time.This would impair the vehicle’s steerability, increasing the risk of an accident.

    A12/00857/21 ↗
  • EU Safety GateGrave2004–2016

    The driver and passenger airbags of the company Takata in vehicles with ammonium nitrate gas generators without drying agents could, under certain climate conditions, lead over time to a chemical change in the fuel.In…

    Texte complet

    The driver and passenger airbags of the company Takata in vehicles with ammonium nitrate gas generators without drying agents could, under certain climate conditions, lead over time to a chemical change in the fuel.In the event of an accident triggering the release of the driver or passenger airbag, this change could cause the gas generators to burst. If a gas generator ruptures, the airbag would then have no restraining function and loose parts from the gas generator could reach the vehicle interior. This would increase the risk of injury for passengers.

    A12/01236/20 ↗
  • EU Safety GateGrave2014–2017

    The occupant classification system for the front passenger seat may not be calibrated in accordance with the specifications. Consequently, an installed child seat may be identified as a person or a small, light person…

    Texte complet

    The occupant classification system for the front passenger seat may not be calibrated in accordance with the specifications. Consequently, an installed child seat may be identified as a person or a small, light person as a child seat. As a result, the passenger airbag could be activated despite the presence of a child seat or the passenger airbag could fail to activate despite the presence of a person on the passenger seat, increasing the risk of injuries.

    A12/00346/20 ↗
  • EU Safety GateGrave2011–2017

    null The steering column is not sufficiently earthed. As a result, in the event of an electrostatic discharge, the driver's airbag may be triggered when not required. This could cause an accident.

    A12/1733/17 ↗
Afficher 3 rappels de plus
  • EU Safety GateGrave2014–2017

    null The starter current limiter may be overloaded and overheat. As a consequence, the surrounding components could ignite, leading to a fire.

    A12/1352/17 ↗
  • EU Safety GateGrave2016, 2017

    null The mixture ratio of the fuel in the inflators of the front-passenger knee, pelvic and side curtain airbags may not be correct. In the event of an accident requiring the deployment of the airbags, this could lead…

    Texte complet

    null The mixture ratio of the fuel in the inflators of the front-passenger knee, pelvic and side curtain airbags may not be correct. In the event of an accident requiring the deployment of the airbags, this could lead to the airbags not inflating properly.

    A12/0763/17 ↗
  • EU Safety GateGrave2003–2016

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered…

    Texte complet

    null Following the update of the control unit coding, the coding parameters of the control unit could be defective. This could give rise to various unplanned reactions in the vehicle: the wrong airbag could be triggered in the event of an accident, the airbag control unit may not recognise the belt buckle status, the engine control unit could be coded with a false maximum speed or various assistance systems may not function.

    A12/0457/17 ↗