Citroën Berlingo 2022 : fiabilité
399 contrôles MOT de Citroën Berlingo immatriculées pour la première fois en 2022 : 6,5 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 4,2 %.
- Taux de défaillance mécanique
- 6,5%
- Médiane de la catégorie, même âge et kilométrage
- 4,2%
- Recalés (toute raison)
- 22,3%
- contrôles MOT
- 399
- Rappels
- 4
Ce qui lâche selon le kilométrage
| Kilométrage | Contrôles | Défaillance mécanique | Médiane catégorie |
|---|---|---|---|
| 0-50k km | 158 | 2,5% | 1,4% |
| 50-100k km | 193 | 7,8% | 5,5% |
| 100-150k km | 41 | 12,2% | 7,6% |
| 150k+ km | 7 | 28,6% | 9,2% |
Ce qui lâche sur cette année
Rappels officiels
Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03151/25 ↗Texte complet
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02655/25 ↗Texte complet
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01423/25 ↗Texte complet
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01876/23 ↗