Fiabilidad del Vauxhall / Opel Grandland
En 69.180 inspecciones MOT británicas, el 6,6 % de los Vauxhall / Opel Grandland no pasó por un defecto mecánico o estructural. La mediana de un SUV compacto con la misma edad y kilometraje: 5,4 %.
- Mejores años
- 2022
- Años con más fallos
- 2018, 2021
- Punto débil con kilometraje alto
- Nada destaca frente a su clase
- Llamadas a revisión oficiales
- 32 llamadas a revisión, 5 graves
- Tasa de fallo mecánico
- 6,6%
- Mediana de la clase, misma edad y kilometraje
- 5,4%
- Primera inspección (3 años), 2021
- 4,2% (3,5%)
- inspecciones MOT
- 69.180
- Quejas en EE. UU.
- 0
Resultados MOT por año de inspección
Toda la flota de este modelo en la inspección de cada año, frente a su clase con la misma edad y kilometraje. Muestra si el modelo mantiene su nivel al envejecer.
| Año de inspección | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo |
|---|---|---|---|---|
| 2024 | 69.180 | 6,6% | 5,4% | 14,4% |
| 2023 | 59.292 | 5,8% | 4,7% | 13,4% |
Tasa de fallo por año de primera matriculación
Tasa de fallo mecánico en la MOT de 2024 según el año de primera matriculación, frente a la mediana de su clase con la misma edad y kilometraje.
Fallos más frecuentes en la inspección
Los defectos que los inspectores registraron con más frecuencia en este modelo, con la redacción original de la DVSA (en inglés), por cada 1.000 inspecciones.
Qué falla según el kilometraje
Porcentaje de inspecciones suspendidas en cada sistema. Los elementos de desgaste (bombillas, neumáticos, escobillas, matrículas) no cuentan para el índice.
(…) = Mediana de la clase, misma edad y kilometraje
Lista de comprobación para el mecánico antes de comprar
Basada en los sistemas en los que este modelo falla más que su clase a partir de 100.000 km y en las llamadas a revisión abiertas.
- Llamadas a revisión: 5 graves afectan a este modelo; pide prueba de que se hicieron
- SR/03574/25 · 2025 · A defective bolted connection in the 48V heating connector may become detached, which could cause loss of heating or overheating and cause…
- A12/01783/24 · 2019–2021 · The software in the battery management control unit cannot detect certain failure modes in the battery. In the vehicles concerned there may…
- A12/01222/23 · 2019–2023 · Due to water infiltration, corrosion of the battery case can occur, creating a risk of fire.
- A12/01825/22 · 2019 · Due to cell voltage deviation, a thermal event can occur inside the high-voltage battery, increasing the risk of fire.
- A12/0888/18 · 2017 · There is a defective seam on the seat cover. In the event of an accident, this may lead to the side airbags not deploying as planned. There…
Comprueba un coche concreto por su VIN en las webs oficiales: NHTSA (US) · DVSA (UK)
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
Due to incorrect coding in the Built-in Systems Interface, the Stop&Start function is inoperative, which may result in increased CO2 emissions.
SR/03584/25 ↗A defective bolted connection in the 48V heating connector may become detached, which could cause loss of heating or overheating and cause the vehicle to catch fire.
SR/03574/25 ↗The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…
SR/03207/25 ↗Texto completo
The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.
The software in the battery management control unit cannot detect certain failure modes in the battery. In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This…
A12/01783/24 ↗Texto completo
The software in the battery management control unit cannot detect certain failure modes in the battery. In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This increases the risk of fire in the vehicle.
The wheel bolts may have been tightened with insufficient torque, leading to vibrations, which could cause the wheels to detach, creating a risk of an accident.
A12/02726/23 ↗Due to water infiltration, corrosion of the battery case can occur, creating a risk of fire.
A12/01222/23 ↗
Mostrar 26 llamadas más
The diesel particle filter may overheat and develop cracks. This could have a negative impact on the environment.
A12/00373/23 ↗Due to cell voltage deviation, a thermal event can occur inside the high-voltage battery, increasing the risk of fire.
A12/01825/22 ↗Due to missing components of the trailer hitch, the coupling may break. As a result, the trailer may inadvertently detach from the vehicle, increasing the risk of an accident.
A12/00350/22 ↗The support for the rail of the front passenger seat may be defective due to the weld not being properly cooled.This could impair the seat retention and the safety belt performance, increasing the risk of injury in the…
A12/01238/21 ↗Texto completo
The support for the rail of the front passenger seat may be defective due to the weld not being properly cooled.This could impair the seat retention and the safety belt performance, increasing the risk of injury in the event of an accident. The product does not meet the requirements of the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01185/21 ↗Texto completo
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
In some vehicles, under certain driving conditions, the urea injector may block when the engine is turned off, meaning that no urea will be injected when the car is started up again. This blockage is temporary, and the…
A11/00057/21 ↗Texto completo
In some vehicles, under certain driving conditions, the urea injector may block when the engine is turned off, meaning that no urea will be injected when the car is started up again. This blockage is temporary, and the injector will start working normally again after 12 minutes’ driving. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The vehicles concerned are not equipped with the air deflectors normally provided and necessary for the front cooling module. This may lead to CO2 emissions above the regulatory limits.
A12/01018/21 ↗The electrodes of the traction batteries may be incorrectly aligned.This could result in a short circuit between the electrodes and lead to a thermal runaway of the battery, causing it to emit toxic smoke without flame.
A12/01028/21 ↗Certain cells of the traction batteries may be missing an anode. This could result in a short circuit and lead to a thermal runaway of the battery, causing it to emit toxic smoke without flame. The product does not meet…
A12/01030/21 ↗Texto completo
Certain cells of the traction batteries may be missing an anode. This could result in a short circuit and lead to a thermal runaway of the battery, causing it to emit toxic smoke without flame. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The wheel suspension may be insufficiently secured.This could result in loss of the rear wheel, increasing the risk of an accident.
A12/00967/21 ↗The trailer coupling device may be detective. This can cause the trailer to detach inadvertently, increasing the risk of an accident.
A12/00728/21 ↗The trailer coupling device may be detective. This can cause the trailer to detach inadvertently, increasing the risk of an accident.
A12/00398/21 ↗The wheel screws are not tightened with the required torque. This could lead to a wheel being lost during driving, increasing the risk of an accident.
A12/00135/21 ↗Possible defect in the diesel particulate filter (DPF), which could lead to particulate emissions exceeding the regulatory limits.
A12/00105/21 ↗The screw connections on the rear wheels' hubs may be inadequate.This can cause a loss of control over the vehicle, increasing the risk of an accident.
A12/00004/21 ↗The vehicles may be affected by a crack in the rear axle. This could lead to a loss of driving stability or to a loss of control over the vehicle, increasing the risk of an accident.
A12/01769/20 ↗The bar element of the trailer coupling device (tow bar) may not be adequately affixed.As a result, it may become detached during a towing operation, increasing the risk of an accident.
A12/00752/20 ↗The screw connection of the trailer coupling module may be defective.This can cause the screws between the base plate and the trailer coupling to break away, increasing the risk of an accident.
A12/00209/20 ↗The end mount of the middle rear safety belt may not be correctly secured and could become detached. This may lead to the loss of the belt’s restraining function, increasing the risk of injury in the event of an…
A12/1629/19 ↗Texto completo
The end mount of the middle rear safety belt may not be correctly secured and could become detached. This may lead to the loss of the belt’s restraining function, increasing the risk of injury in the event of an accident.
The vehicles may have a higher diesel particulate rate than the specified rate. Higher emission of diesel particles causes global warming, acid rain, and harms the environment and human health.
A12/0986/19 ↗The crankcase seal plug has not been correctly tightened. This may lead to oil leaking through the engine compartment onto the road, creating a hazard for following traffic.
A12/1484/18 ↗The screws on the lower shock absorber mountings have been insufficiently tightened. This may lead to a loss of control of the vehicle.
A12/1362/18 ↗The axle and brake parts may not have been correctly screwed together. This could consequently lead to loss of control over the vehicle.
A12/1334/18 ↗There is a defective seam on the seat cover. In the event of an accident, this may lead to the side airbags not deploying as planned. There is thus an increased risk of injury for the occupants.
A12/0888/18 ↗The screws attaching the tow-bar are insufficiently tightened. As a result, the tow-bar may detach.
A12/0605/18 ↗Oil can enter the intake circuit of the engine. This can lead to engine failure.
A12/0498/18 ↗