Peugeot Partner / Rifter 2018: fiabilidad
14.643 inspecciones MOT de Peugeot Partner / Rifter matriculados por primera vez en 2018: el 16,8 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 14,5 %.
- Tasa de fallo mecánico
- 16,8%
- Mediana de la clase, misma edad y kilometraje
- 14,5%
- No pasó la MOT (cualquier motivo)
- 34,1%
- inspecciones MOT
- 14.643
- Llamadas a revisión
- 10
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 1388 | 8,7% | 6,8% |
| 50-100k km | 3955 | 13,4% | 12,2% |
| 100-150k km | 4702 | 17,4% | 15,2% |
| 150k+ km | 4598 | 21,7% | 18,2% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Texto completo
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started,…
SR/01450/25 ↗Texto completo
The software supposed to prevent the engine from stopping suddenly and to transmit data to customer service is not working properly. This can lead the ‘Ready’ mode to be unavailable after the vehicle has been started, to an acceleration power's loss and to the engine suddenly cutting out while driving. This increases the risk of accidents and injuries.
When there is a specific error in the vacuum circuit and after 6 seconds with the brake applied, the electronic control unit send an "Invalid Value" to the hydraulic brake compensation (HBC). This can cause the HBC to…
A12/03179/24 ↗Texto completo
When there is a specific error in the vacuum circuit and after 6 seconds with the brake applied, the electronic control unit send an "Invalid Value" to the hydraulic brake compensation (HBC). This can cause the HBC to stop functioning, leading to a reduction in braking efficiency. This increases the risk of accidents and injuries.
In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02824/24 ↗A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the vehicle is switched off. This can lead to fuel remaining in the heater, producing…
A12/00043/22 ↗Texto completo
The electrical supply to and software for the additional heating is not correctly designed and the heater can shut off too soon when the vehicle is switched off. This can lead to fuel remaining in the heater, producing smoke and fuel leaks increasing the risk of fire.
Mostrar 4 llamadas más
Due to cabling and software upgrade issues, fuel may leak. Leaking fuel increases the risk of fire
A12/01845/21 ↗The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…
A12/01184/21 ↗Texto completo
The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The front passenger seatbelt is defective. As a result, its restraining function will be impaired, increasing the risk of injury in the event of an accident.
A12/00342/20 ↗Possible misalignment of the ratchet on the handbrake lever latching mechanism. As a result the handbrake may not engage or could disengage by itself, increasing the risk of an accident.
A12/0926/19 ↗