Peugeot 508 2019: fiabilidad
2458 inspecciones MOT de Peugeot 508 matriculados por primera vez en 2019: el 7,6 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 5,8 %.
- Tasa de fallo mecánico
- 7,6%
- Mediana de la clase, misma edad y kilometraje
- 5,8%
- No pasó la MOT (cualquier motivo)
- 17,5%
- inspecciones MOT
- 2458
- Llamadas a revisión
- 15
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 566 | 5,1% | 3,1% |
| 50-100k km | 1328 | 8,1% | 5,5% |
| 100-150k km | 428 | 8,6% | 8,6% |
| 150k+ km | 136 | 9,6% | 10,6% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
The vehicle may have a faulty high-voltage battery, which could cause overheating and cause the battery or vehicle to catch fire.
SR/03304/25 ↗Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Texto completo
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory…
SR/00434/25 ↗Texto completo
Due to a faulty software of the electronic engine control unit (ECU), an incorrect value may be given when the data are processed by the vehicle. This may result in nitrogen oxide (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This…
A12/01705/24 ↗Texto completo
The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This increases the risk of fire in the vehicle.
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗The traction battery can overheat due to faulty monitoring software and catch fire.
A12/01741/23 ↗
Mostrar 9 llamadas más
The traction battery may overheat and cause a fire.
A12/01619/23 ↗The traction battery can overheat due to faulty monitoring software and catch fire.
A12/01336/23 ↗The high voltage battery has a cell voltage mismatch. This could cause a fire.
A12/01350/22 ↗The high voltage battery has a cell voltage mismatch. This could cause fire.
A12/01343/22 ↗The electrical supply to the water heater unit can shut off too soon when the vehicle is stopped. Fuel can therefore remain in the heater, producing smoke and fuel leakage. Moreover, the information about atmospheric…
A12/00877/22 ↗Texto completo
The electrical supply to the water heater unit can shut off too soon when the vehicle is stopped. Fuel can therefore remain in the heater, producing smoke and fuel leakage. Moreover, the information about atmospheric pressure sent by the BSI to the water heating unit is incorrect, so the unit is unable to operate. The unburnt fuel may remain inside the unit may produce smoke when next activated and fuel may potentially leak, increasing the risk of fire.
Due to cabling and software upgrade issues, fuel may leak. Leaking fuel increases the risk of fire
A12/01845/21 ↗The brake hoses on the rear axle can be damaged by coming into contact with the wheel rims. This can cause brake fluid to leak out, increasing the risk of an accident.
A12/01318/20 ↗The rear axle connection may be defective.This may affect the driving stability, increasing the risk of an accident.
A12/00744/20 ↗Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.
A12/1594/19 ↗