AutoDefects
Español

Peugeot 5008 2018: fiabilidad

55 % más fallos mecánicos que su clase

5086 inspecciones MOT de Peugeot 5008 matriculados por primera vez en 2018: el 12,9 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 8,3 %.

Tasa de fallo mecánico
12,9%
Mediana de la clase, misma edad y kilometraje
8,3%
No pasó la MOT (cualquier motivo)
23,2%
inspecciones MOT
5086
Llamadas a revisión
14

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km4936,9%3,9%
50-100k km308911,8%7,8%
100-150k km126117,1%10,6%
150k+ km24317,7%12,3%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas3,1%
Frenos5,5%
Motor, escape y emisiones1,2%
Dirección1,1%
Carrocería, bastidor y corrosión2,8%
Cinturones y airbags1,0%
Luces y electricidad (desgaste)4,6%
Neumáticos (desgaste)6,8%
Escobillas y parabrisas (desgaste)4,9%
Otros y matrículas (desgaste)0,2%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2008–2026

    Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…

    Texto completo

    Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.

    SR/01379/26 ↗
  • EU Safety GateGrave2008–2025

    The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.

    SR/02936/25 ↗
  • EU Safety Gate2008–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texto completo

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02658/25 ↗
  • EU Safety Gate2008–2022

    In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/02824/24 ↗
  • EU Safety Gate2008–2022

    A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.

    A12/01870/23 ↗
  • EU Safety Gate2008–2019

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to…

    Texto completo

    Computer software used in after-sales operations between October 2020 and January 2021 was incorrect. This may lead to Nitrogen Oxides (NOx) emissions above the regulatory limits. Excessive NOx emissions pose a risk to the environment.

    A12/00046/22 ↗
Mostrar 8 llamadas más
  • EU Safety Gate2008–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Texto completo

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01184/21 ↗
  • EU Safety Gate2018

    The passenger seat may not be adequately fastened.As a result, the seatback may not provide sufficient support in the event of an accident, increasing the risk of an injury.

    A12/00822/20 ↗
  • EU Safety Gate2016–2020

    The welding of the tow bar may be faulty. As a result, the trailer coupling could break, increasing the risk of an accident.

    A12/00646/21 ↗
  • EU Safety Gate2018, 2019

    The screws of the spare wheel support may be insufficiently tightened. As a result, the spare wheel could be detached inadvertently, increasing the risk of an accident and posing a risk to the following traffic.

    A12/1895/19 ↗
  • EU Safety Gate2008–2037

    Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.

    A12/1594/19 ↗
  • EU Safety GateGrave2018

    The wiring harness on the voltage retaining device (DMTR) may have been inadequately tightened, which may cause the device to break. This could result in the engine not starting and, in very rare cases, it could start a…

    A12/0661/19 ↗
  • EU Safety GateGrave2018

    The wheel fastening nuts may have been insufficiently tightened. There is a risk that the wheel may come off or crack during driving, increasing the risk of accident.

    A12/1812/18 ↗
  • EU Safety Gate2018

    The cylinder-housing oil gallery plug may not have been correctly tightened. As a consequence oil might leak which presents a skid hazard for following traffic.

    A12/1364/18 ↗