Peugeot 3008 2021: fiabilidad
12.158 inspecciones MOT de Peugeot 3008 matriculados por primera vez en 2021: el 3,5 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 3,5 %.
- Tasa de fallo mecánico
- 3,5%
- Mediana de la clase, misma edad y kilometraje
- 3,5%
- No pasó la MOT (cualquier motivo)
- 11,6%
- inspecciones MOT
- 12.158
- Llamadas a revisión
- 12
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 7860 | 2,4% | 2,4% |
| 50-100k km | 3950 | 5,0% | 5,4% |
| 100-150k km | 324 | 9,0% | 7,5% |
| 150k+ km | 24 | 8,3% | 5,9% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead…
SR/01379/26 ↗Texto completo
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire.
The vehicle may have a fuel leak in the high-pressure hose, between the high-pressure pump and the rail, because of loose nuts. This may cause a fire in the vehicle.
SR/02936/25 ↗The vehicle may have a faulty high-voltage battery, which could cause overheating and cause the battery or vehicle to catch fire.
SR/03304/25 ↗Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02658/25 ↗Texto completo
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
In certain vehicles fitted with the DV5R E6.3 engine, the nitrogen oxide (NOx) emissions are above the regulatory limits. Excessive NOx emissions pose a risk to the environment.
A12/02824/24 ↗The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This…
A12/01705/24 ↗Texto completo
The software in the battery management control unit cannot detect certain failure modes in the battery In the vehicles concerned there may be a defect in the high-voltage battery, which could lead to overheating. This increases the risk of fire in the vehicle.
Mostrar 6 llamadas más
A software error in the engine control unit prevents the malfunction indicator light (MIL) from switching on if the urea injector stops working. This can lead to higher emissions and poses a risk to the environment.
A12/01870/23 ↗The traction battery can overheat due to faulty monitoring software and catch fire.
A12/01741/23 ↗The traction battery may overheat and cause a fire.
A12/01619/23 ↗The traction battery can overheat due to faulty monitoring software and catch fire.
A12/01336/23 ↗Due to an error in the manufacturing process, the seat rail and seat-belt attachment may be defective.This will lead to increased the risk of injury in the event of an accident.
A12/00601/21 ↗Wrong engine calibration tuning might cause the exhaust emissions' level of nitrogen oxides (NOx) to exceed regulated limits. Nitrogen oxides are harmful to human health and the environment.
A12/1594/19 ↗