Mercedes-Benz S-Class 2020: fiabilidad
692 inspecciones MOT de Mercedes-Benz S-Class matriculados por primera vez en 2020: el 3,0 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 4,0 %.
- Tasa de fallo mecánico
- 3,0%
- Mediana de la clase, misma edad y kilometraje
- 4,0%
- No pasó la MOT (cualquier motivo)
- 9,0%
- inspecciones MOT
- 692
- Llamadas a revisión
- 16
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 202 | 1,0% | 3,1% |
| 50-100k km | 310 | 4,5% | 4,5% |
| 100-150k km | 129 | 3,9% | 4,4% |
| 150k+ km | 51 | 0,0% | 3,5% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
The front axle brake hoses may develop a leak, causing brake fluid to escape. This could reduce braking performance and, if the fluid spills onto the road, reduce grip for following vehicles, increasing the risk of an…
SR/03179/26 ↗Texto completo
The front axle brake hoses may develop a leak, causing brake fluid to escape. This could reduce braking performance and, if the fluid spills onto the road, reduce grip for following vehicles, increasing the risk of an accident.
In the event of an independent hardware failure, the lambda control in the Engine Control Unit (ECU) software can erroneously increase the amount of injected fuel during cylinder deactivation. As a result, exhaust…
A12/03598/24 ↗Texto completo
In the event of an independent hardware failure, the lambda control in the Engine Control Unit (ECU) software can erroneously increase the amount of injected fuel during cylinder deactivation. As a result, exhaust temperatures can increase and this can damage surrounding components (e.g. engine wiring harness, catalytic converter). This can create an unexpected loss of propulsion, increasing the risk of accidents and injuries. Moreover, this can increase the risk of fire. In addition, local statutory exhaust emission limits could be exceeded.
The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate…
A12/00730/21 ↗Texto completo
The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate and the panel could become detached from the vehicle, posing a risk to other road users.
The 12 volt ground wire screw in the trunk may be defective, which can lead to that certain electronic stability program (ESP) functions can be disabled or strong electrical currents may lead to a local increase in…
A12/02416/23 ↗Texto completo
The 12 volt ground wire screw in the trunk may be defective, which can lead to that certain electronic stability program (ESP) functions can be disabled or strong electrical currents may lead to a local increase in temperature, increasing the risk of an accident or fire.
The fuse box of the engine compartment may be defective. High electrical currents could increase the temperature, creating a risk of fire. This is turn can lead to an electricity interruption and the vehicle may lose…
A12/02133/23 ↗Texto completo
The fuse box of the engine compartment may be defective. High electrical currents could increase the temperature, creating a risk of fire. This is turn can lead to an electricity interruption and the vehicle may lose propulsion power, increasing the risk of an accident.
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…
A12/00017/22 ↗Texto completo
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.
Mostrar 9 llamadas más
Trim parts of the backrest on both front seats can detach during rear airbag deployment in the event of an accident. The airbag deployment may be impaired and the airbag itself may be damaged, increasing the risk of…
A12/01379/22 ↗Texto completo
Trim parts of the backrest on both front seats can detach during rear airbag deployment in the event of an accident. The airbag deployment may be impaired and the airbag itself may be damaged, increasing the risk of injury to rear occupants.
The airbag control unit might not have been bolted according to specifications and might detect incorrect acceleration values when the vehicle is moving. In consequence, the restraint systems might not be activated…
A12/00497/22 ↗Texto completo
The airbag control unit might not have been bolted according to specifications and might detect incorrect acceleration values when the vehicle is moving. In consequence, the restraint systems might not be activated completely, which can increase the risk of an injury in case of an accident.
When the vehicle stops the airbag control unit may deactivate the passenger airbag. This could increase the risk of injury in the event of an accident.
A12/00284/22 ↗The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the…
A12/00045/22 ↗Texto completo
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire.
The middle fold-down rear headrest may not be correctly locked into the in-use position.This could impair its protective effect, increasing the risk of injury in the event of an accident.
A12/01357/21 ↗The electrical connector of the side-impact sensors might not be correctly latched and could become detached.This would lead to delayed activation of the restraint systems in the event of a side impact, reducing their…
A12/01361/21 ↗Texto completo
The electrical connector of the side-impact sensors might not be correctly latched and could become detached.This would lead to delayed activation of the restraint systems in the event of a side impact, reducing their restraining effect and increasing the risk of injury to the vehicle occupants.
Due to defective fixing, the electrical connection between the 48V or 12V wiring harness and the support point may be sporadically interrupted.This could result in electrical arcing, leading to increased risk of…
A12/01321/21 ↗Texto completo
Due to defective fixing, the electrical connection between the 48V or 12V wiring harness and the support point may be sporadically interrupted.This could result in electrical arcing, leading to increased risk of fire.Furthermore, if the electrical connection were completely interrupted, the vehicle could not be started.
The screw connection of an electrical connector at the pre-fuse box in the passenger footwell may be defective, which could increase the electrical transition resistance at that connection. As a result, the high…
A12/01260/21 ↗Texto completo
The screw connection of an electrical connector at the pre-fuse box in the passenger footwell may be defective, which could increase the electrical transition resistance at that connection. As a result, the high electrical currents flowing through the connection could increase the temperature in this area, increasing the risk of fire.
The internal tie rods used for the front axle steering may not have been intended for the type of vehicle, and thus, could be too short.In such a case, the rods could be bent or pulled out in the event of an additional,…
A12/00152/21 ↗Texto completo
The internal tie rods used for the front axle steering may not have been intended for the type of vehicle, and thus, could be too short.In such a case, the rods could be bent or pulled out in the event of an additional, sudden force. This would impair the steerability of the vehicle, increasing the risk of an accident.